Download Print this page

DeWalt DXPW3025 Instruction Manual page 8

Hide thumbs Also See for DXPW3025:

Advertisement

Available languages

Available languages

• Ifproper starting proceduree Ifengine does not s tart a fter
isnotfollowed, engine can
twopulls, squeeze trigger
kickback causing serious
ofgun torelieve pump
hand a nd arm injury,
pressure. Pull starter cord
slowly until resistance
isfelt.
Then pull c ord rapidly to
avoid k ickback and prevent
hand o rarm injury.
• The spray gun/wand is
• Keep c hildren away f rom the
apowerful cleaning tool
pressure washer atall t imes.
that c ould l ook like atoy
toachild.
• Reactive
force ofspray
,, Donot o verreach
orstand
wH cause g un/wand to
onanunstable support.
KCKDaCK.
and COUld cause e Donot u seoressure
wasner
theooerator toslid orfa
wn,,e s tanding ona_aaaer.
ormsd_rect thespray,
o Grogun/wand fifty ywith
Imorooer control of9un!
both nands. Exoect the
wand canresult in
gun toKICKDaCK
wnen
njurles toself a nd
triggered.
others.
ADANGER:
RiSK OF iNJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING
OR STORING
WHAT CAN HAPPEN
Fuel or oil can leak or spill
and could result in fire or
breathing hazard. Serious
injury or death can result.
Fuel or oil leaks will damage
carpet, paint or other
surfaces in vehicles
or trailers.
Oil could fill the cylinder and
damage the engine if the unit
is not stored or transported
in an upright position.
HOW TO PREVENT IT
If pressure washer is
equipped with a fuel shut-
off valve, turn the valve to
the OFF position before
transporting to avoid fuel
leaks. If pressure washer is
not equipped with a fuel shut-
off valve, drain the fuel from
tank before transporting. Only
transport fuel in an OSHA-
approved container.
Always place pressure
washer on a protective mat
when transporting to protect
against damage to vehicle
from leaks.
Always transport and store
unit in an upright position.
Remove pressure washer
from vehicle immediately
upon arrival at your
destination.

Advertisement

loading