Xerox Docucolor 12 User Manual page 47

KEY POINT:
•
For the best results, use only the
recommended paper sizes, paper weights, or
paper types. If you do not use recommended
papers, you may experience print quality
problems, paper jams, or possible component
failures.
Refer to the Recommended Materials List and
the Color Materials Usage Guide for more
information.
•
If you are loading pre-drilled paper, load it into
Paper Tray 5 with the undrilled long edge as
the leading edge (holes to the left).
•
Do not load the paper above the fill line of the
paper tray edge guides.
•
Straighten the paper stack each time the
paper tray is opened. Close the paper tray
slowly to avoid shifting the paper stack. This
ensures that the paper is in the correct
position when the paper tray is in the
operating position.
•
If paper feeding or curl problems occur, flip the
paper over in the tray and send the prints
again. If the performance improves, continue
to load the paper in this manner. Testing has
shown that paper handling and print
performance vary with room temperature,
humidity, paper quality, image area on prints,
etc. All of these variables interact and, in
some cases, you must decide which paper
loading method works best.
DOCUCOLOR 12 PRINTER USER GUIDE 3–5
1
3
3
4
5
6
7