Xerox Docucolor 12 User Manual page 33

3 Power Saver button - Press this button to restore
the printer from Power Saver mode to full power.
The Power Saver mode enables the DocuColor 12
Printer to use less power than when it is in Ready
mode.
The DocuColor 12 Printer will go into Power Saver
mode automatically if it is not used for a length of
time specified by the System Administrator in the
Tools Mode. The DocuColor 12 Printer will enter a
warm-up cycle to return to full power when you
press the Power Saver button or when you send
a job to the printer.
4 Clear (C) - Press the Clear (C) button to delete all
values displayed in a selected field. Re-enter the
desired new values using the Control Panel
buttons.
NOTE: The Clear button can not be used when a
job is incomplete or to clear a fault or jam.
NOTE: The Control Panel buttons that are not
described in this section are not functional on the
DocuColor 12 Printer.
DOCUCOLOR 12 PRINTER USER GUIDE
Figure 6: Power Saver button
C
2–5 GETTING TO KNOW THE DOCUCOLOR 12 PRINTER
Figure 7: Clear button
1
2
3
4
5
6
7