Xerox WorkCentre 5735 System Administrator Manual page 334

Enable Web User Interface Authentication
A second, networked Authentication Server will be necessary for web user interface Authentication, if
Remotely on the Network was selected. Full instructions for configuring network authentication, using
Kerberos, NDS, SMB, and LDAP/LDAPS are contained in the Network Authentication section of this
guide.
The path to the Authentication Server configuration screen is:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Security] link.
2. Click on the [Authentication] link and select [Setup] in the directory tree.
3. The Xerox Access Setup page displays. In the Authentication, Authorization, and
Personalization area click on the [Edit..] button.
4. Select the [Username / Password Validated Remotely on the Network] option from the
[Authentication method on the machine's web user interface (Web UI)] drop-down menu.
5. Follow the instructions to select the required Authentication Type from the drop-down menu.
• See Authentication Configuration for Kerberos (Solaris)
• See Authentication Configuration for Kerberos (Windows 2000/2003)
• See Authentication Configuration for SMB (Windows NT4) and SMB (Windows
2000/2003/2008)
• See Authentication Configuration for SMB (Windows NT4) and SMB (Windows
2000/2003/2008)
• See Authentication Configuration for LDAP/LDAPS
6. When you have configured the required Authentication Type, click on the [Save] button to return
to the Xerox Access Setup page.
Configure your LDAP Server
Configure LDAP communications on the device as stated in the LDAP/LDAPS topic. Refer to
Authentication Configuration for LDAP/LDAPS
To set Authentication to control access to individual Services, in the Current Configuration area,
7.
click on the [Edit] button for Access Setup Wizard.
a. On the Device Access page, in the Pathway Access area, select either [Unlocked] or
[Locked] for the following options:
• Service Pathway
• Job Status Pathway
• Machine Status Pathway
b. Click on the [Next] button. The Service Access page displays. To set Authentication to
control access to individual Features, select individual feature radio button for the following
authentication access:
• Unlocked
• Locked
• Hidden
8. Click on the [Next] button to return to the Authentication Configuration screen.
334 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Internet Services as System Administrator
on page 159.
on page 159.
on page 160.
on page 157.
on page 158.
on page 160.
on page 24.