Xerox WorkCentre 5735 System Administrator Manual page 211

• Ensure Network Scanning is configured on your device.
• To communicate with the Validation server via HTTPS, SSL must be enabled on the device.
To Add or Edit a Validation Server
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Services] link.
2. Click on the [Workflow Scanning] link.
3. Select [Validation Servers] in the directory tree.
The Validation Servers page will allow you to configure the following settings:
• Add - displays the [Add Validation Server] page, which allows you to configure a new
validation server.
• Edit - displays a page which allows you to edit the above settings for the selected server.
• Delete - deletes the selected server.
4. In the Validation Servers area, click on the [Add] button to add a new validation server, or select
an existing validation server from the list and click on the [Edit] button to display the Add
Validation Server page.
5. In the Server Information area:
a. For Protocol, select from the drop-down menu the communication protocol for the Validation
Server.
b. Select the method you want to use to specify the Validation Server. Select either [IPv4
Address], [IPv6 Address] or [Host Name].
c. Enter the IP Address and Port or Hostname and Port of the Validation Server in the [IP
Address: Port] or [Host Name: Port] field.
Note: The default port number is 80 if you select HTTP for Protocol or 443 if you selected HTTPS
for Protocol.
d. In the [Path] field, enter the path on the server.
Note: The format for a directory path for FTP is /directory/directory, while the format for a
directory path for SMB is \directory\directory.
e. Specify the time in seconds after which the server will time out in the [Response Timeout]
field. The range is from 5 to 100. The default is 8.
f. Click on the [Apply] button to save settings and return to the Validation Server page.
To Delete a Validation Server from the list:
1. From the Validation Servers page, in the Validation Servers area:
a. Highlight the Validation Server and click on the [Delete] button.
b. Click on the [OK] button when you see the confirmation message 'Are you sure you want to
delete the selected validation server?'.
Access Internet Services as System Administrator
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
on page 24.
System Administrator Guide
211