Tektronix Phaser 840 Troubleshooting Manual page 52

2
Advanced Print Features
42 Phaser 840 Color Printer
Landscape orientation
Prints the image horizontally (landscape) on the page. Leave this box
unchecked to print the image vertically (portrait) on the page.
Refer to the Stylized representation of the page, in the lower left corner of
the dialog box, to see how your selection will look when printed.
Center images
Centers the image in the page's image area.
If this box is not checked, the lower left corner of the image is aligned with
the lower left corner of the printable area of the page.
If the Center images box is checked and the Replicate images box is
checked, the set of replicated images are centered in the image area of the
page.
Replicate images
Fills the page's image area with as many copies of the image as will fit.
The size of each replicated image is determined by the setting in the Scale
text box.
If the size of each replicated image (shown as black rectangles in the
stylized representation of the page) is too small to display, the total image
area of the printed page is shown as a single gray rectangle.
Image size
Reflects the dimensions, in inches or millimeters, of the image.
If the value in the Scale box is out-of-range, the image dimensions are
displayed with question marks.