Tektronix Phaser 840 Troubleshooting Manual page 104

7
Using Printer Utilities
94 Phaser 840 Color Printer
1.
From the printer's CD-ROM, run the Installer application. Select Custom
Install. Select Printer Utilities.
2.
From your computer's hard disk, open the PhaserTools folder. Open the
Printer Utilities folder.
3.
From the PhaserTools folder, double-click Apple Printer Utility.
4.
In the Printer Selector dialog box, make the following selections:
Under AppleTalk Zones, select your printer's zone.
Under Printers, select your Phaser printer.
Click Open Printer.
5.
From the File menu, select Send PostScript File; the Select the PostScript
files to download dialog box appears.
6.
Select the folder location of the PostScript file(s) that you want to
download.
7.
Select a utility file. Click Add.
8.
Click Send.
9.
At the prompt Save PostScript output as, you are asked for a file
name for saving printer output. Use the default name given in the edit box
or type a new name. (Printer output includes status messages generated
by the printer reporting such conditions as out of paper.)
10.
Click Save.
11.
If no output is returned by the printer, the Apple Printer Utility displays a
dialog box; click Continue. If output is returned by the printer, you won't
see this dialog box.
Check your computer's hard disk for the message file created by the utility.