Adjusting The Monitor - Clarion VRX848RVD Owner's Manual

Basic Operations
G Adjusting the MID
The MID gain, MID frequency (center
frequency) and MID Q can be adjusted as
follows.
2-1. Touch the [MID] key.
2-2. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
2-3. Touch the [w] or [z] key to adjust to
desirable level.
GAIN : –6 to 6 (The factory default
setting is "0")
FREQ. : 700Hz/1kHz/2kHz (The factory
default setting is "1k")
Q : 1.5/2 (The factory default setting
is "2")
G Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
2-1. Touch the [TREBLE] key.
2-2. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
2-3. Touch the [w] or [z] key to adjust to
desirable level.
GAIN : –6 to 6 (The factory default
setting is "0")
FREQ. : 8kHz/12kHz (The Factory default
setting is "12K")
G Adjusting the non fader output volume
You can adjust the volume output from the unit's
non fader output terminal.
2-1. Touch the [NON FADER VOL] key.
2-2. Touch the [w] or [z] key to adjust to
desirable level.
∗ The factory default setting is "0". (Setting
range: –6 to 6)
2-3. Touch the [RTN] key, [ESC] key, or press
the [ADJ] button.
G Turning on/off the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
2-1. Touch the [M•B EX] key.
Each time you touch the [M•B EX] key, you
can switch between "ON" and "OFF". When
the MAGNA BASS EX effect is turned on,
"M•B EX" lights in the display.

Adjusting the MONITOR

1. Press the [ADJ] button, then touch the
[MONITOR] key to display the MONITOR
setting menu.
2. Touch the item you wish to set.
∗ When setting is completed, touch the [RTN]
key, [ESC] key, or press the [ADJ] button.
G Adjusting the brightness and tone of color
Notes:
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
2-1. Touch the [MONI ADJ] key to display
[BRIGHT] and [COLOR] key. Touch the
[BRIGHT] and [COLOR] key to adjust
BRIGHT and COLOR.
• BRIGHT:
Adjust the brightness of the display.
• COLOR:
Adjust the color saturation.
• This operation is available only when the car
is stopped and the parking brake is applied.
2-2. Operate the touch key to adjust a level.
• BRIGHT:
[Î] Press to make image brighter
[Å] Press to make image dimmer
• COLOR:
[Î] Press to increase color depth
[Å] Press to decrease color depth
G Adjusting the dimmer level
Use to adjust panel brightness when car lights
are ON/OFF.
• The factory default:
When the car light is off: Brightest setting (58
steps)
When the car light is on: Medium brightness (29
steps)
2-1. Touch the [DIMMER LEVEL] key to adjust
the dimmer level.
Î Î ] or [Å Î Î
2-2. Touch the [Î
VRX848RVD/VRX743R
Å Å ] key to adjust. Å Å
27