Clarion VRX848RVD Owner's Manual page 32

DVD Video Player Operations (VRX848RVD only)
GWhen watching through a conventional
type of the rear view monitor (4:3)
• N PS : The leftmost and rightmost areas of
the screen are cut off.
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being
panned (scrolled).
• N LB : A black zone is created in the top and
bottom areas of the screen.
This method displays Cinema Scope and
Vista Vision images without cutting them off
by creating a black zone on the top and
bottom gaps.
GWhen watching through a wide type of the
rear view monitor (16:9)
• WIDE:
3. Touch the [RTN] key ([ESC] key).
Setting up the angle mark display
You can set up so that the angle mark appears
on scenes where the angles can be switched.
1. Follow the steps 1 to 3 in "Selecting the
DVD SETUP menu".
2. Touch the [ANGLE] key to select "ON" or
"OFF".
∗ The factory default setting is "OFF".
3. Touch the [RTN] key ([ESC] key).
Setting up the disc menu language.
1. Following the steps 1 to 3 in "Selecting the
DVD SETUP menu", touch the [MENU
LANGUAGE] key.
36
VRX848RVD/VRX743R
2. Touch the key to select a desired language
to set it.
∗ The factory default setting is "ENGLISH".
3. Touch the [RTN] key ([ESC] key).
Setting up the audio language
1. Following the steps 1 to 3 in "Selecting the
DVD SETUP menu", touch the [AUDIO
LANGUAGE] key.
2. Touch the key to select a desired language
to set it.
∗ The factory default setting is "ENGLISH".
3. Touch the [RTN] key ([ESC] key).
Setting up the subtitle language
1. Following the steps 1 to 3 in "Selecting the
DVD SETUP menu", touch the [SUB TITLE
LANG.] key.
2. Touch the key to select a desired language
to set it.
∗ The factory default setting is "ENGLISH".
3. Touch the [RTN] key ([ESC] key).
Setting up the password for setting
up of the parental level
1. Following the steps 1 to 3 in "Selecting the
DVD SETUP menu", touch the
[PASSWORD] (password) key.
2. Touch the ten-key(0 to 9) to input a 4-digit
password.
∗ The factory default setting is "0000".
∗ Input "4356" to return password to "0000".
• Input an old password, and touch the [ENT]
key.
• Input a new password, and touch the [ENT]
key.
3. Touch the [RTN] key ([ESC] key).
Note:
When a disc with view limited is played, the input
screen requiring you to input the password may
appear. When this happens, enter the correct
password, otherwise play does not start.