Table of Contents
Advertisement
Basic Operations
Adjusting the MID
The MID gain, MID frequency (center
frequency) and MID Q can be adjusted as
follows.
1. Press the [ADJ] button, then touch the
[AUDIO] key.
2. Touch the [MID] key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the [w] or [z] key to adjust to
desirable level.
GAIN
: –6 to 6 (The factory default setting
is "0")
FREQ. : 700Hz/1kHz/2kHz (The factory
default setting is "1k")
Q
: 1.5/2 (The factory default setting is
"2")
5. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
1. Press the [ADJ] button, then touch the
[AUDIO] key.
2. Touch the [TREBLE] key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the [w] or [z] key to adjust to
desirable level.
GAIN
: –6 to 6 (The factory default setting
is "0")
FREQ. : 8kHz/12kHz (The Factory default
setting is "12K")
5. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Adjusting the non fader output
volume
You can adjust the volume output from the unit's
non fader output terminal.
1. Press the [ADJ] button, then touch the
[AUDIO] key.
2. Touch the [NON FADER VOL] key.
26
VRX746VD
3. Touch the [w] or [z] key to adjust to
desirable level.
∗ The factory default setting is "0". (Setting
range: –6 to 6)
4. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Turning on/off the MAGNA BASS
EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1. Press the [ADJ] button, then touch the
[AUDIO] key.
2. Thouch the [M•B EX] key.
Each time you touch the [M•B EX] key, you
can switch between "ON" and "OFF". When
the MAGNA BASS EX effect is turned on,
"M•B EX" lights in the display.
3. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Adjusting the MONITOR
Adjusting the brightness and tone
of color
Notes:
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [ADJ] button to switch to the
ADJUST MODE menu.
2. Touch the [MONITOR] key.
3. Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.
G "BRIGHT":
Adjust the brightness of the display.
G "HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the car
is stopped and the parking brake is applied.
Advertisement
Chapters
Table of Contents
