Dvd Video Operations; Ejecting A Disc - Clarion VRX848RVD Owner's Manual

DVD Video Player Operations (VRX848RVD only)
Notes:
• Never insert foreign objects into the disc insertion
slot.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
• 8 cm (single play) discs cannot be used.
CAUTION
With the screen open, a driver may not see the
disc insertion slot. For your safety, insert a disc
with the screen closed.
Watching/Listening to a disc
already inserted
1. Press the [FUNC] button to select the DVD
mode. Play starts automatically. If no disc is
loaded in the unit, "NO DISC" appears in the
display.
WARNING
• Videos may be played back with particu-
larly loud sound. Increase the volume
gradually from the minimum after the
video images are displayed.
• For your safety, the driver should not
watch the video or operate the controls
while driving. Please note that watching
and operating the video while driving are
prohibited by law in some countries.
Notes:
• For your safety, the VRX848RVD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
• When playing an NTSC format DVD video and
video CD, no image will be produced at the rear
monitor.
Pausing play
1. Press the [s] button to pause play.
"PAUSE" appears in the display.
2. To resume disc play, press the [s] button
again.

Ejecting a disc

1. Press the [Q] button a disc ejects. "EJECT"
appears in the display. The play mode then
switches to Radio.
38
VRX848RVD/VRX743R
∗ If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload). In this case, however, the play
mode will remain set to Radio.
Note:
• If you force a disc into before auto reloading, this
can damage the disc.

DVD Video Operations

Watching a DVD-Video
After disc loading, the play mode is
automatically engaged.
• Button operation may not be allowed
depending on the story of the disc.
∗ NTSC images cannot be output to a rear monitor.
GAfter the menu screen is displayed
For normal DVD-Video discs, the DVD menu
screen appears.
After the DVD menu screen is displayed, select
an item in the following operations and play it
back.
Showing the DVD menu
1. Touch the screen to show the menu screen.
Touch the [MENU] key during playback.
The DVD menus appears.
The displayed contents may differ,
depending on the DVD software.
• Example showing DVD menu display
2. To select the DVD menu contents, touch the
[KEY] key. The "Cross KEY PAD" (wzÅ
Î) is displayed.
3. Touch the [NUM] key, the display changes to
the "TEN KEY PAD" (0~9).
Touch the [+] key to return to the "Cross
KEY PAD".
4. Select the DVD menu contents use either the
"Cross KEY PAD" or the "TEN KEY PAD"
according to the disc contents menu.
5. Touch the [ENT] key and touch the [ESC]
key.