Overheating Protection - Miele KM 5773 Operating And Installation Manual

Safety features

Overheating protection

All induction coils and the cooling
system of the electronic are designed
with an overheating protection feature.
Before overheating of the induction
coils or the cooling system, the
overheating protection takes the
following actions at the burner/cooktop:
– If the booster function is turned on, it
will be canceled.
– If the power level is set between 10
and 12, it will be reduced. The set
and the reduced power level flash
alternately. The reduced power level
is additionally shown by the number
of segments in the lighting cycle.
– If an induction coil is affected, the
burner will automatically turn off. A 0
and the residual heat symbol is
shown in the display.
Once the burner has sufficiently cooled,
you can used it as usual.
– If the cooling system is affected, all
burners will automatically turn off,
and the display will show 0
alternating with the set power level.
Once the cooling system has
sufficiently cooled, the burners will
automatically operate with the originally
set power level.
32
The overheating protection will be
activated if:
– empty cookware is heated.
– grease or oil is heated at a high
power level.
– the bottom of the cooktop is not
sufficiently vented.
If the overheating protection still
activates, call Technical Service.