Memory Function - Miele KM 5773 Operating And Installation Manual

Timer and Memory function

Memory function

All settings, which are set to a burner
from turning on until turning off, can be
recorded in a memory program. 5
frequently used operations can be
recorded, but only one at a time can be
recorded and used.
Memory programs can be recorded for
all burners.
Multiple programs can be recorded for
one burner.
Taken programs are marked with a
period after the number.
Example.
P1 program not taken
P1. program taken.
To record a new program when all 5
programs are taken, one program must
be deleted.
26
Recording a memory program
The memory program is selected first
and then the burner is used as usual.
The maximum saving time is 99 minutes
and a maximum of 10 changes to the
power level can be made.
^ Turn the cooktop on.
^ Touch the M sensor.
P 1 shows in the timer/memory display.
^ Touch the sensor + until the desired
program number shows.
^ Touch the sensor M until a long signal
sounds.
^ Turn the desired burner on within 10
seconds.
The recording starts.
The burner indicator and the program
number light during the recording in the
timer/memory display.
The recording is automatically saved
when the burner is turned off or by
touching M until a long signal sounds.
The program sequence will be shown
after saving it.
The display shows the time rounded up
to full minutes, during the operation the
display shows the exact time.