Overheating Protection - Miele SmartLine Tepan Yaki Operating And Installation Instructions

Overheating protection

All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
and/or cooling elements get too hot, the
overheating protection mechanism cuts
in in one of the following ways:
Induction coils
- The set power level is reduced.
- The Tepan Yaki zone switches itself
off automatically.  flashes
alternately with  in the timer
display.
You can use the Tepan Yaki zone again
as usual when the fault code has gone
out.
Cooling elements
- The set power level is reduced.
- The Tepan Yaki zone switches itself
off automatically.
The affected Tepan Yaki zone can only
be used again as usual once the
cooling element has cooled down to a
safe level.
The overheating protection may be
activated under the following
circumstances:
- Fat or oil is being heated on a high
power level.
- Insufficient ventilation to the
underside of the Tepan Yaki.
- A hot Tepan Yaki zone being
switched on after an interruption to
the power supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact your Miele
dealer.
Safety features
33