Miele KM 5773 Operating And Installation Manual page 27

Using a memory program
To have the same result when using the
memory program while it was recorded,
the same pot must be used. Amount
and size of the food must also be the
same.
^ Turn the cooktop on.
^ Touch the M sensor.
P 1 shows in the timer/memory display.
^ Touch the sensor + until the desired
program number shows.
^ Touch the sensor M until a long signal
sounds.
The assigned burner turns on and after
the saved program has elapsed, it will
turn off. During the cycle the burner
indicator flashes in the timer/memory
display. The program number and
remaining time are shown alternately.
Timer and Memory function
Showing the memory program cycle
^ Turn the cooktop on.
^ Touch the M sensor.
^ Touch the sensor + until the desired
program number shows.
The respective burner display shows
the respective power setting. The
assigned burner indicator flashes in the
timer/memory display and the time
assigned to the power level is shown.
The display shows the time rounded up
to full minutes, during operation the
display shows the exact time.
Deleting a memory program
^ Turn the cooktop on.
^ Touch the M sensor.
^ Touch the sensor - or + until the
desired program number shows.
^ Touch the -/+ sensors at the same
time until a long signal sounds and
the period after the number goes out.
27