Resetting The Touch Controls - Miele KM 5773 Operating And Installation Manual

Resetting the touch controls

Automatic reset
To ensure the cooktop functions
properly the touch controls will
automatically reset:
– when the cooktop is connected to
the electrical supply.
– if there is an interruption to the
electrical supply, and
– during use in response to changing
light conditions.
During the automatic reset of the touch
controls the Child Safety Lock indicator
illuminates and the cooktop cannot be
turned on.
If the automatic reset could not be
completed an A will light in the burner
displays front left and right, and a F in
the rear left burner display. The right
rear burner display and the timer
display will show numbers.
In this case the touch controls must be
manually reset.
14
Manual reset
^ Make sure no direct light (sun or
artificial) beams on the cooktop. The
surrounding area of the cooktop
should not be completely shaded or
brightly lit.
^ Make sure the cooktop and the touch
controls are not covered. Remove all
pots and pans and clean the cooktop
if necessary.
^ Trip the circuit breaker to the cooktop
or turn off the power main for 1
minute.
The touch controls will automatically
reset when the power is restored.
If the problem persists, call Miele
Technical Service.