E5: Modeling Flash; E6: Auto Bracketing Set; E7: Bracketing Order; F: Controls - Nikon D610 User Manual

e5: Modeling Flash

If On is selected when the camera is being used with the built-in
flash or an optional CLS-compatible flash unit (0 294), a
modeling flash will be emitted when the camera depth-of-field
preview button is pressed (0 77). No modeling flash is emitted
if Off is selected.

e6: Auto Bracketing Set

Choose the setting or settings bracketed when auto bracketing (0 153) is in effect.
Choose AE & flash (j) to perform both exposure and flash-level bracketing, AE only
(k) to bracket only exposure, Flash only (l) to perform only flash-level bracketing,
WB bracketing (m) to perform white-balance bracketing (0 156), or ADL
bracketing (y) to perform bracketing using Active D-Lighting (0 158). Note that
white balance bracketing is not available at image quality settings of NEF (RAW) or
NEF (RAW) + JPEG.

e7: Bracketing Order

At the default setting of MTR > under > over (H), exposure, flash, and white balance
bracketing are performed in the order described on pages 153 and 156. If
Under > MTR > over (I) is selected, shooting will proceed in order from the
lowest to the highest value. This setting has no effect on ADL bracketing.

f: Controls

f1: OK Button (Shooting Mode)

Choose the role played by the J button during shooting: selecting the center focus
point (J Select center focus point), highlighting the active focus point
(K Highlight active focus point), or none (Not used).
G button A Custom Settings menu
G button A Custom Settings menu
G button A Custom Settings menu
G button A Custom Settings menu
U
241