Release Mode; Choosing A Release Mode - Nikon D610 User Manual

k

Release Mode

Choosing a Release Mode

To choose a release mode, press the release mode dial lock
release and turn the release mode dial to the desired setting.
Mode
S
Single frame: Camera takes one photograph each time shutter-release button is pressed.
Continuous low speed: While shutter-release button is held down, camera records 1–5
C
frames per second.
L
shooting speed, 0 229). Note that only one picture will be taken if the flash fires.
Continuous high speed: While shutter-release button is held down, camera records up to
C
H
6 frames per second.
Quiet shutter-release: As for single frame, except that mirror does not click back into place
while shutter-release button is fully pressed, allowing user to control timing of click
J
made by mirror, which is also quieter than in single frame mode. In addition, beep
does not sound regardless of setting selected for Custom Setting d1 (Beep; 0 228).
Qc (quiet continuous) shutter-release: While shutter-release button is held down, camera
M
records up to 3 frames per second.
Self-timer: Use self-timer for self-portraits or to reduce blurring caused by camera shake
E
(0 85).
Remote control: Shutter is controlled using shutter-release button on optional ML-L3
4
remote control (0 85).
Mirror up: Choose this mode to minimize camera shake in telephoto or close-up
M
photography or in other situations in which the slightest camera movement can result
UP
in blurred photographs.
1 Average frame rate with an EN-EL15 battery, continuous-servo AF, manual or shutter-priority
auto exposure, a shutter speed of
Setting d5 at default values, and memory remaining in memory buffer.
2 Average frame rate with an EN-EL15 battery, continuous-servo AF, manual or shutter-priority
auto exposure, a shutter speed of
memory remaining in memory buffer.
Frame rate drops at slow shutter speeds or very small apertures (high f-numbers),
when vibration reduction (available with VR lenses) or auto ISO sensitivity control is
on (0 105, 107), or when the battery is low.
Description
1
Frame rate can be chosen using Custom Setting d5 (CL mode
2
Note that only one picture will be taken if the flash fires.
2
Camera noise is reduced.
1
/ s or faster, remaining settings other than Custom
200
1
/ s or faster, other settings at default values, and
200
k
83