Nikon D610 User Manual page 176

5
Recompose the photograph.
6
Take the photograph.
Press the shutter-release button the rest of the way down to shoot. If desired,
additional pictures can be taken without releasing FV lock.
7
Release FV lock.
Press the Fn button to release FV lock. Confirm that the FV lock icon (e) is no
longer displayed in the viewfinder.
D
Using FV Lock with the Built-in Flash
FV lock is only available with the built-in flash when TTL is selected for Custom Setting e3
(Flash cntrl for built-in flash, 0 236).
A
Using FV Lock with Optional Flash Units
FV lock is also available with optional flash units in TTL and (where supported) monitor pre-
flash AA and monitor pre-flash A flash control modes. Note that when commander mode is
selected for Custom Setting e3 (Flash cntrl for built-in flash, 0 236), you will need to set
the flash control mode for the master or at least one remote group to TTL or AA.
A
Metering
The metering areas for FV lock when using optional flash unit are as follows:
l
Flash unit
Stand-alone flash unit
Used with other flash units
(Advanced Wireless Lighting)
A
See Also
For information on using the depth-of-field preview or A AE-L/AF-L button for FV lock, see
Custom Setting f3 (Assign preview button, 0 244) or Custom Setting f4 (Assign AE-L/AF-L
button, 0 244).
150
Flash mode
i-TTL
AA Area metered by flash exposure meter
i-TTL
AA
Area metered by flash exposure meter
A (master flash)
Metered area
5-mm circle in center of frame
Entire frame