First Steps; Charge The Battery - Nikon D610 User Manual

Product manual
Table of Contents

Advertisement

First Steps

Charge the Battery

The camera is powered by an EN-EL15 rechargeable Li-ion battery (supplied). To
maximize shooting time, charge the battery in the supplied MH-25 battery charger
before use. About 2 hours and 35 minutes are required to fully recharge the battery
when no charge remains.
1
Connect the AC power cable.
Connect the power cable. The AC adapter plug should be
in the position shown at right; do not rotate.
2
Remove the terminal cover.
Remove the terminal cover from the battery.
3
Insert the battery.
Place the battery in the battery bay as shown in the
illustration on the charger.
4
Plug the charger in.
The CHARGE lamp will flash slowly while the battery
charges.
D
Charging the Battery
Charge the battery indoors at ambient temperatures between
5°C–35°C (41°F–95°F). The battery will not charge if its
temperature is below 0°C (32°F) or above 60°C (140°F).
5
Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops flashing. Unplug the charger
and remove the battery.
Battery
Charging
charging
complete
X
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents