Nikon D6 User Manual With Warranty
Hide thumbs Also See for D6:
Table of Contents

Advertisement

Quick Links

DIGITAL CAMERA
User's Manual (with Warranty)
• Read this manual thoroughly before using the camera.
• To ensure proper use of the camera, be sure to read
"For Your Safety" (page xviii).
• After reading this manual, keep it in a readily accessible
place for future reference.
En

Advertisement

Table of Contents
loading

Summary of Contents for Nikon D6

  • Page 1 DIGITAL CAMERA User's Manual (with Warranty) • Read this manual thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page xviii). • After reading this manual, keep it in a readily accessible place for future reference.
  • Page 2 ( 0 206) ❏ BS-3 accessory shoe cover ( 0 204) ❏ UC-E24 USB cable ❏ AN-DC22 strap ❏ Warranty (printed on the back cover of this manual) ❏ User’s Manual Memory cards are sold separately. D6 Model Name: N1823 Package Contents...
  • Page 3 D The Nikon Download Center A pdf version of this manual is available from the Nikon Download Center, together with an English-language reference manual with detailed operating instructions, which can be downloaded in pdf format or viewed online in html. Visit the Nikon Download Center to download...
  • Page 4: About This Manual

    About This Manual ❚❚ Symbols The following symbols and conventions are employed in this manual. Use them to help locate the information you need. This icon marks notes, information that should be read before using this product. This icon marks tips, additional information you may find helpful when using this product.
  • Page 5 For more information, see “For Your Safety” ( 0 xviii). ❚❚ Nikon User Support Visit the site below to register your camera and keep up-to-date with the latest product information. You will find answers to frequently asked questions (FAQs) and can contact us for technical assistance.
  • Page 6: Table Of Contents

    Table of Contents Package Contents ................... ii About This Manual................. iv Menu List....................xii For Your Safety..................xviii Notices ....................xxvi Getting to Know the Camera Parts of the Camera ................1 Camera Body..............1 The Power Switch............. 8 The Top Control Panel ............ 9 The Rear Control Panel..........
  • Page 7 Inserting the Battery ............. 32 Attaching a Lens............. 35 Inserting Memory Cards..........38 Camera Setup..............43 The Battery Level and Number of Exposures Remaining..47 Battery Level ..............47 Memory Card Indicators and Number of Exposures Remaining ......... 48 Basic Photography and Playback Taking Photographs ................
  • Page 8 Camera Controls The G Button ..................80 Using the Menus............. 81 The i Button (the i Menu) ..............88 The Still Photography i Menu........90 The Movie i Menu ............92 The Playback i Menu............ 93 The R Button ..................94 Viewfinder Photography ..........
  • Page 9 The S ( Q ) Button................114 Adjusting ISO Sensitivity ........... 114 Enabling Auto ISO Sensitivity Control....116 The E Button..................117 Adjusting Exposure Compensation ...... 117 The T Button ................118 Adjusting Image Quality ........... 118 Choosing an Image Size ..........120 The U Button ..................
  • Page 10 CPU lenses..............175 Non-CPU lenses and Other Accessories....183 The Electronic Rangefinder ........187 Compatible Flash Units..............189 The Nikon Creative Lighting System (CLS)..189 Other Compatible Accessories............198 Attaching a Power Connector and AC Adapter..............207 Table of Contents...
  • Page 11 [DX (24 × 16)] Selected for Image Area....260 Battery Endurance................263 Location Data (GPS/GLONASS)............266 Trademarks and Licenses..............267 Notices....................275 Bluetooth and Wi-Fi (Wireless LAN) ..........277 Index......................282 Warranty Terms - Nikon Europe Service Warranty ....287 Table of Contents...
  • Page 12: Menu List

    Menu List The camera offers the following menus. Some items may not be displayed depending on camera settings or on the type of lens, flash unit, or other accessory attached. PLAYBACK MENU PHOTO SHOOTING MENU Delete Photo shooting menu bank Playback folder Extended photo menu banks Playback display options...
  • Page 13 PHOTO SHOOTING MENU MOVIE SHOOTING MENU Vignette control Reset movie shooting menu Diffraction compensation File naming Auto distortion control Destination Flicker reduction Image area Flash control Frame size/frame rate Auto bracketing Movie quality Multiple exposure Movie file type HDR (high dynamic range) ISO sensitivity settings Interval timer shooting White balance...
  • Page 14 CUSTOM SETTING MENU CUSTOM SETTING MENU Custom settings bank b Metering/exposure a Autofocus ISO sensitivity step value AF-C priority selection EV steps for exposure cntrl AF-S priority selection Exp./flash comp. step value Focus tracking with lock-on Easy exposure compensation Focus points used Matrix metering Store points by orientation Center-weighted area...
  • Page 15 CUSTOM SETTING MENU CUSTOM SETTING MENU d Shooting/display e Bracketing/flash Continuous shooting Flash sync speed speed Flash shutter speed Max. continuous release Exposure comp. for flash Limit release mode Auto N ISO sensitivity selection control Sync. release mode options Flash burst priority Exposure delay mode Modeling flash Electronic front-curtain...
  • Page 16 CUSTOM SETTING MENU SETUP MENU f Controls Format memory card Customize i menu Language Customize i menu (Lv) Time zone and date Custom controls Monitor brightness Multi selector center Monitor color balance button Virtual horizon Shutter spd & aperture lock Information display Customize command dials AF fine-tuning options...
  • Page 17 SETUP MENU RETOUCH MENU Wireless remote (WR) options NEF (RAW) processing Assign remote (WR) Fn button Trim Airplane mode Resize Connect to smart device D-Lighting Connect to PC (built-in Wi-Fi) Red-eye correction Wired LAN/WT Straighten Conformity marking Distortion control Battery info Perspective control Slot empty release lock Monochrome...
  • Page 18: For Your Safety

    For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. Keep these safety instructions where all those who use this product will read them. A DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury.
  • Page 19 Keep dry. Do not handle with wet hands. Do not handle the plug with wet hands. Failure to observe these precautions could result in fire or electric shock. Do not let your skin remain in prolonged contact with this product while it is on or plugged in.
  • Page 20 Do not use batteries, chargers, or AC adapters not specifically designated for use with this product. When using batteries, chargers, and AC adapters designated for use with this product, do not: • Damage, modify, forcibly tug or bend the cords or cables, place them under heavy objects, or expose them to heat or flame.
  • Page 21 Turn this product off when its use is prohibited. Disable the location data feature. End location tracking. Disable wireless features when the use of wireless equipment is prohibited. The radio-frequency emissions produced by this product could interfere with equipment onboard aircraft or in hospitals or other medical facilities.
  • Page 22 A DANGER (Batteries) Do not mishandle batteries. Failure to observe the following precautions could result in the batteries leaking, overheating, rupturing, or catching fire: • Use only rechargeable batteries approved for use in this product. • Do not expose batteries to flame or excessive heat. •...
  • Page 23 A WARNING (Batteries) Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention. Keep batteries out of reach of household pets and other animals. The batteries could leak, overheat, rupture, or catch fire if bitten, chewed, or otherwise damaged by animals.
  • Page 24 A DANGER (CR1616 Lithium Watch Batteries) Do not mishandle batteries. Failure to observe the following precautions could result in the battery leaking, overheating, rupturing, or catching fire: • Do not attempt to recharge the battery. • Do not expose batteries to flame or excessive heat. •...
  • Page 25 A WARNING (CR1616 Lithium Watch Batteries) Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention. Do not immerse batteries in water or expose to rain. Failure to observe this precaution could result in fire or product malfunction.
  • Page 26: Notices

    • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in...
  • Page 27 Notice Concerning Prohibition of Copying or Reproduction ● Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, government bonds, or local government bonds, even if such copies or reproductions are stamped “Sample.”...
  • Page 28 Only Nikon brand electronic accessories (including lenses, chargers, batteries, AC adapters, and flash accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.
  • Page 29 Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
  • Page 30 Notices...
  • Page 31: Getting To Know The Camera

    Getting to Know the Camera Parts of the Camera Camera Body Eyelet for camera strap ( 0 27) GNSS antenna I button ( 0 108) BKT button ( 0 113) Release mode dial ( 0 109) Release mode dial lock release ( 0 109) Y button ( 0 111) Parts of the Camera...
  • Page 32 Movie-record button ( 0 63) E (focal plane mark) Power switch ( 0 8) Diopter adjustment control ( 0 14) Shutter-release button ( 0 50) Accessory shoe (for optional E button ( 0 117) flash unit) S ( Q ) button ( 0 114) Accessory shoe cover ( 0 204) Top control panel ( 0 9, 171) Parts of the Camera...
  • Page 33 Stereo microphone (for Battery-chamber cover latch movies; 0 63) ( 0 32) Battery-chamber cover ( 0 32) Meter coupling lever Mirror ( 0 63, 216) AF-mode button ( 0 98) Focus-mode selector ( 0 97) Self-timer lamp Flash sync terminal cover Flash sync terminal Ten-pin remote terminal cover Ten-pin remote terminal...
  • Page 34 Pv button ( 0 62, 134) Security slot (for anti-theft cable; 0 7) Sub-command dial Lens mounting mark ( 0 35) Fn1 button ( 0 135) Lens mount ( 0 35) Fn2 button ( 0 135) CPU contacts Sub-command dial for vertical Tripod socket shooting Shutter-release button for...
  • Page 35 13 14 O ( Q ) button ( 0 76) Rear control panel ( 0 11, 174) K button ( 0 71) S button ( 0 109) Monitor ( 0 18, 55, 63) T button ( 0 118) G button ( 0 80) U button ( 0 121) g ( h / Q ) button ( 0 87, 125) R button ( 0 94)
  • Page 36 Viewfinder eyepiece ( 0 205) Card slot cover release button cover ( 0 38) Eyepiece adapter ( 0 205) Card slot cover release button Eyepiece shutter lever ( 0 13) (under cover; 0 38) Eyepiece adapter latch C button ( 0 107) ( 0 205) Multi selector (vertical) a button ( 0 55, 63)
  • Page 37 D The GNSS Antenna If possible, stay in the open when using location data services. Keep the antenna pointed to the sky for best reception. D The Connector Covers Be sure to close the covers when the connectors are not in use. Foreign matter in the connectors could cause malfunction.
  • Page 38: The Power Switch

    The Power Switch Rotate the power switch to the “ON” position as shown to turn the camera on. Returning the switch to the “OFF” position turns the camera off. D The LCD Illuminator Rotating the power switch to D activates the backlights for the buttons and control panels (LCD illuminator).
  • Page 39: The Top Control Panel

    The Top Control Panel The following indicators appear in the top control panel at default settings. For a full list of the indicators that may be displayed, see “Camera Displays” ( 0 171) in “Technical Notes”. Shutter speed Exposure indicator Exposure Exposure mode ( 0 108) Exposure compensation...
  • Page 40 D Camera Off Display If the camera is turned off with a battery and memory card inserted, the memory card icon, the number of photos in the current folder ), and the number of exposures remaining ) will be displayed in the top control panel. Depending on the memory card, the camera may in rare cases not display this information when a card is inserted.
  • Page 41: The Rear Control Panel

    The Rear Control Panel The following indicators appear in the rear control panel at default settings. For a full list of the indicators that may be displayed, see “Camera Displays” ( 0 174) in “Technical Notes”. Release mode ( 0 109) White balance ( 0 121) Size (JPEG images;...
  • Page 42: The Viewfinder

    The Viewfinder The following indicators appear in the viewfinder at default settings. For a full list of the indicators that may be displayed, see “Camera Displays” ( 0 159) in “Technical Notes”. 12 13 12-mm reference circle for ISO sensitivity indicator ( 0 114) center-weighted metering ISO sensitivity ( 0 114)
  • Page 43 D The Viewfinder When the battery is exhausted or no battery is inserted, the display in the viewfinder will dim. The display will return to normal when a charged battery is inserted. D Temperature Extremes The brightness of the control panel and viewfinder displays varies with temperature, and response times may drop when the temperature is low;...
  • Page 44 A The Diopter Adjustment Control The viewfinder can be focused by lifting and rotating the diopter adjustment control. With your eye to the viewfinder, rotate the diopter control until display in the viewfinder is in sharp focus. • Corrective lenses (available separately) can be used to further adjust viewfinder diopter.
  • Page 45: The Live View Displays (Photos/Movies)

    The Live View Displays (Photos/Movies) Press the a button to display the view through the lens in the monitor. Rotate the live view selector to C to take photographs or to 1 to record movies. ❚❚ Live View Photography The following indicators appear in the monitor at default settings.
  • Page 46 Touch shooting ( 0 18) ISO sensitivity ( 0 114) i icon ( 0 88) ISO sensitivity indicator ( 0 114) “k” (appears when memory Aperture remains for over 1000 exposures; 0 48) Shutter speed Number of exposures Metering ( 0 111) remaining ( 0 48, 258) Battery indicator ( 0 47) Parts of the Camera...
  • Page 47 ❚❚ Movies Recording indicator ( 0 63) Release mode (still photography; 0 70) “No movie” indicator Sound level ( 0 66) Frame size and rate/image quality Microphone sensitivity Time remaining ( 0 63) Frequency response Parts of the Camera...
  • Page 48: Touch Controls

    Touch Controls • The touch-sensitive monitor offers a variety of controls that can be operated by touching the display with your fingers. • Touch controls can be used to: - Focus and release the shutter ( 0 19) - Adjust settings ( 0 20) - View pictures ( 0 21) - View movies ( 0 23) - Access the i menu ( 0 23)
  • Page 49 ❚❚ Focusing and Releasing the Shutter • Touch the monitor during live view to focus on the selected point (touch AF). • During still photography, the shutter will be released when you lift your finger from the display (touch shutter). •...
  • Page 50 ❚❚ Adjusting Settings • Tap highlighted settings in the display. • You can then choose the desired option by tapping icons or sliders. • Tap Z or press J to select the chosen option and return to the previous display. Parts of the Camera...
  • Page 51 ❚❚ Playback • Flick left or right to view other pictures during full-frame playback. • In full-frame playback, touching the bottom of the display brings up a frame-advance bar. Slide your finger left or right over the bar to scroll rapidly to other pictures.
  • Page 52 • To zoom in on a picture displayed in full-frame playback, use a stretch gesture or give the display two quick taps. After zooming in, you can adjust the zoom ratio using stretch gestures to zoom in and pinch gestures to zoom out.
  • Page 53 ❚❚ Viewing Movies • Movies are indicated by a 1 icon; to start playback, tap the on-screen guide. • Tap the display to pause. Tap again to resume. • Tap Z to exit to full-frame playback. ❚❚ The i Menu When the i menu ( 0 88) is displayed, you can tap items to view options.
  • Page 54 ❚❚ Text Entry • When a keyboard is displayed, you can enter text by tapping the keys. Text display area Keyboard area Keyboard selection • To position the cursor, tap e or f or tap directly in the text display area. •...
  • Page 55 ❚❚ Navigating the Menus • After pressing the G button to display the menus, you can slide up or down to scroll. • Tap a menu icon to choose a menu. • Tap menu items to display options. You can then choose the desired option by tapping icons or sliders.
  • Page 56 D The Touch Screen • The touch screen responds to static electricity. It may not respond when touched with fingernails or gloved hands. For improved response when using the touch screen with gloves, select [Enabled] for [Touch controls] > [Glove mode] in the setup menu. •...
  • Page 57: First Steps

    First Steps Readying the Camera Attaching the Strap To attach a strap (whether the supplied strap or one that has been purchased separately): Readying the Camera...
  • Page 58: Charging The Battery

    Charging the Battery Charge the supplied EN-EL18c battery in the supplied MH-26a battery charger before use. An exhausted battery will fully charge in about two hours and 35 minutes. D The Battery and Charger Read and follow the warnings and cautions in “For Your Safety” ( 0 xviii) and “Caring for the Camera and Battery: Cautions”...
  • Page 59 Remove the contact protector. Slide the contact protector from the charger as shown. Charge the battery. Contacts Guide Chamber lamps Charge lamps (green) Readying the Camera...
  • Page 60 • Insert the battery (terminals first), aligning the end of the battery with the guide and then sliding the battery in the direction indicated until it clicks into place. • The lamp for the chamber containing the battery (“L” or “R”) will start to flash as charging begins.
  • Page 61 • If no battery inserted: There is a problem with the charger. Unplug the charger and consult a Nikon-authorized service representative. • If a battery is inserted: A problem has occurred with the battery or charger during charging.
  • Page 62: Inserting The Battery

    Inserting the Battery Turn the camera off before inserting or removing the battery. Remove the BL-6 battery- chamber cover. Lift the battery-chamber cover latch, turn it to the open ( A ) position ( and remove the battery-chamber cover ( Attach the cover to the battery.
  • Page 63 Insert the battery. Insert the battery fully and securely as shown. Latch the cover. • Rotate the latch to the closed position ( ) and fold it down as shown ( • Be sure the cover is securely latched to prevent the battery from becoming dislodged during operation.
  • Page 64 ❚❚ Removing the Battery Before removing the battery, turn the camera off, lift the battery-chamber cover latch, and turn it to the open ( A ) position. D Removing the Battery-Chamber Cover To unlatch the battery-chamber cover so that it can be removed from the battery, slide the battery release in the direction indicated by the arrow ( H ) until it stops.
  • Page 65: Attaching A Lens

    Attaching a Lens • The lens generally used in this manual for illustrative purposes is an AF-S NIKKOR 50mm f/1.4G. • Be careful to prevent dust entering the camera. • Confirm that the camera is off before attaching the lens. - Remove the camera body cap ( ) and rear lens cap ( - Align the mounting marks on the camera (...
  • Page 66 - Rotate the lens as shown until it clicks into place ( • Remove the lens cap before taking pictures. D CPU Lenses with Aperture Rings When using a CPU lens equipped with an aperture ring ( 0 182), lock aperture at the minimum setting (highest f-number).
  • Page 67 ❚❚ Detaching Lenses • After turning the camera off, press and hold the lens release button ( ) while turning the lens in the direction shown • After removing the lens, replace the lens caps and camera body cap. Readying the Camera...
  • Page 68: Inserting Memory Cards

    Inserting Memory Cards The camera is equipped with two memory card slots: Slot 1 ( ) and Slot 2 ), allowing simultaneous use of two memory cards. • Turn the camera off before inserting or removing memory cards. • Do not push on the memory card while pressing the eject button.
  • Page 69 Insert the memory card. Inserting a card upside down or backwards could damage the camera or the card. Check to be sure that the card is in the correct orientation. Holding the card with the rear label toward the monitor, slide it all the way into the slot.
  • Page 70 A Two Memory Cards When two memory cards are inserted (one in each of Slots 1 and 2), the role played by the card in Slot 2 can be selected using [Role played by card in Slot 2] in the photo shooting menu. •...
  • Page 71 D Memory Cards • Memory cards may be hot after use. Observe due caution when removing memory cards from the camera. • Do not perform the following operations during formatting or while data are being recorded, deleted, or copied to a computer or other device.
  • Page 72 D No Memory Card Inserted If no memory card is inserted, the exposure count displays in the viewfinder and top control panel will show S . If the camera is turned off with a battery and no memory card inserted, S will be displayed in the top control panel.
  • Page 73: Camera Setup

    Camera Setup The language option in the setup menu is automatically highlighted the first time menus are displayed. Choose a language and set the camera clock. Turn the camera on. Highlight [Language] in the setup menu and press 2 . •...
  • Page 74 Select a language. Press 1 or 3 to highlight the desired language and press J (the languages available vary with the country or region in which the camera was originally purchased). Highlight [Time zone and date] and press 2 . Choose a time zone.
  • Page 75 Turn daylight saving time on or off. • Select [Daylight saving time] in the [Time zone and date] display. • Highlight [On] (daylight saving time on) or [Off] (daylight saving time off) and press J . • Selecting [On] advances the clock one hour; to undo the effect, select [Off].
  • Page 76 Exit the menus. Lightly press the shutter-release button halfway to exit to shooting mode. D The Clock Battery The camera clock is powered by a separate, non-rechargeable CR1616 lithium battery with a life of about two years. When this battery is low, a B icon will be displayed in the top control panel while the standby timer is on, indicating that it is time to purchase a replacement.
  • Page 77: The Battery Level And Number Of Exposures Remaining

    The Battery Level and Number of Exposures Remaining Before taking photographs, check the battery level and number of exposures remaining. Battery Level Check the battery level before taking photographs. The battery level is shown in the top control panel and viewfinder. Top control Viewfinder Description...
  • Page 78: Memory Card Indicators And Number Of Exposures Remaining

    Memory Card Indicators and Number of Exposures Remaining The top control panel and viewfinder show the number of additional photographs that can be taken at current settings (i.e, the number of exposures remaining). • The top control panel shows the slot or slots that currently hold a memory card (the example shows the icons displayed when cards are inserted in...
  • Page 79 • If two memory cards are inserted, the camera will show the number of additional photographs that can be recorded to the card in Slot 1. When the card in Slot 1 is full, the display will show the number of exposures remaining on the card in Slot •...
  • Page 80: Basic Photography And Playback Taking Photographs

    Basic Photography and Playback Taking Photographs Photographs can be framed in the viewfinder (viewfinder photography) or in the monitor (live view photography). Framing Photographs in the Viewfinder (Viewfinder Photography) Ready the camera. Holding the handgrip in your right hand and cradling the camera body or lens with your left, bring your elbows in against the sides of your chest.
  • Page 81 Frame the photograph. • Frame a photograph in the viewfinder. • Position the main subject in the AF-area brackets. Press the shutter-release button halfway to focus. • The in-focus indicator ( I ) will appear in the viewfinder when the focus operation is complete.
  • Page 82 Smoothly press the shutter- release button the rest of the way down to take the photograph. The memory card access lamp will light while the photograph is being recorded. Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete.
  • Page 83 A The Standby Timer (Viewfinder Photography) The camera uses a standby timer to help reduce the drain on the battery. The timer starts when the shutter-release button is pressed halfway and expires if no operations are performed for about 6 seconds. The viewfinder display and the shutter speed and aperture indicators in the top control panel turn off when the timer expires.
  • Page 84 A Framing Photos in Portrait (“Tall”) Orientation The camera is equipped with controls for use in portrait (“tall”) orientation, including vertical shutter-release, Fn, and AF-ON buttons, main and sub-command dials, and a multi selector. • Rotate the vertical shooting shutter-release button lock to L to avoid accidentally operating these controls when the camera is in landscape (“wide”)
  • Page 85: Framing Photographs In The Monitor (Live View)

    Framing Photographs in the Monitor (Live View) Rotate the live view selector to C (live view photography). Press the a button. • The mirror will be raised and live view will start. The viewfinder will go dark and the view through the lens will be displayed in the monitor.
  • Page 86 Ready the camera. Hold the handgrip securely in your right hand and cradle the camera body or lens with your left. Frame the photograph. Position the subject near the center of the frame. Taking Photographs...
  • Page 87 Press the shutter-release button halfway to focus. • Focus locks while the shutter- release button is pressed halfway. • If the camera is able to focus, the focus point will be displayed in green. If the camera is unable to focus, for example because the subject is too close to the camera, the focus point will flash red.
  • Page 88 Press the shutter-release button the rest of the way down to take the photograph. The monitor turns off during shooting. Press the a button to exit live view. Taking Photographs...
  • Page 89 D Shooting in Live View • Although these effects are not visible in the final pictures, during live view you may notice the following in the monitor: - Moving objects in the display appear distorted (individual subjects such as trains or cars moving at high speed through the frame may be distorted, or the entire frame may appear distorted when the camera is panned horizontally) - Jagged edges, color fringing, moiré, and bright spots may appear in...
  • Page 90 D The Count-Down Display A count down will appear in the top left corner of the display approximately 30 s before live view ends automatically. • If the timer has been triggered by Custom Setting c4 [Monitor off delay], the count down will be displayed in black starting 30 s before the timer expires, switching to red when there are only 5 s to go.
  • Page 91 A Touch Controls Touch controls can be used in place of the shutter-release button to focus and take pictures during live view photography ( 0 19). A Live View Zoom Preview Press the X button to magnify the view in the monitor up to a maximum of about 11×.
  • Page 92 A Previewing Focus During Live View To temporarily select maximum aperture for an improved focus preview during live view, press the Pv button. To return aperture to its original value, press the Pv button again or focus using autofocus. If the shutter- release button is pressed all the way down to take a picture during focus preview, aperture will return to the original value before the photo is taken.
  • Page 93: Recording Movies

    Recording Movies Live view can be used to record movies. A “Filming” Versus “Recording” Throughout this manual, the terms “filming” and “recording” are used as follows: “filming” is used if the live view selector is rotated to 1 , while “recording”...
  • Page 94 Press the AF-ON button to focus. • Focus before beginning recording. • Focus can be adjusted by tapping your subject in the monitor. Press the movie-record button to start recording. Recording Movies...
  • Page 95 • A recording indicator will be displayed in the monitor. The monitor also shows the time remaining, or in other words the approximate amount of new footage that can be recorded to the memory card. Recording indicator Time remaining • The camera can be refocused during recording by pressing the AF-ON button or by tapping your subject in the monitor.
  • Page 96 Press the movie-record button again to end recording. Press the a button to exit live view. D Recording Movies • When filming movies, you may notice the following in the display. These phenomena will also be visible in any footage recorded with the camera.
  • Page 97 - Jagged edges, color fringing, moiré, and bright spots in the display - Bright regions or bands in scenes lit by flashing signs and other intermittent light sources or when the subject is briefly illuminated by a strobe or other bright, momentary light source - Flicker occurring while power aperture is in use •...
  • Page 98 D The Count-Down Display A count down will appear in the top left corner of the display approximately 30 s before live view ends automatically. • If the timer has been triggered by Custom Setting c4 [Monitor off delay], the count down will be displayed in black starting 30 s before the timer expires, switching to red when there are only 5 s to go.
  • Page 99 A Focusing During Movie Recording Focus can also be adjusted by pressing the shutter-release button halfway. A Live View Zoom Preview Press the X button to zoom in on the view in the monitor ( 0 61). For a 100% zoom ratio during recording, press the X button. Press W ( M ) to restore the previous zoom ratio.
  • Page 100: Taking Photos During Filming

    Taking Photos During Filming Photos can be taken during filming by pressing the shutter-release button all the way down. The resulting photo will have an aspect ratio of 16:9. • A C icon will flash in the display when a photo is taken. •...
  • Page 101: Playback

    Playback Press the K button to view photos and movies recorded with the camera. Press the K button. • A picture will be displayed in the monitor. • The memory card containing the picture currently displayed is shown by an icon. Press 4 or 2 to view additional pictures.
  • Page 102 A Image Review When [On] is selected for [Image review] in the playback menu, pictures are automatically displayed in the monitor after shooting without the user pressing the K button. Playback...
  • Page 103: Viewing Movies

    Viewing Movies Movies are indicated by a 1 icon. Tap the a icon in the display or press the center of the multi selector to start playback (a progress bar shows your approximate position in the movie). 1 icon Length a icon Current position/total length Progress bar...
  • Page 104 ❚❚ Movie Playback Operations Description Press 3 to pause playback. Pause Press the center of the multi selector to resume Resume playback when playback is paused or during rewind/ advance. Press 4 to rewind, 2 to • advance. Speed increases with each press, from 2×...
  • Page 105 Description If the movie contains indices, rotating the sub- command dial takes you to the next or previous index. • Indices can be added or removed from the [EDIT Skip to index MOVIE] menu, which can be displayed by pausing playback and pressing the i button.
  • Page 106: Deleting Unwanted Pictures

    Deleting Unwanted Pictures Pictures can be deleted as described below. Note that once deleted, pictures cannot be recovered. Display the picture. • Press the K button to start playback and press 4 or 2 until the desired picture is displayed. •...
  • Page 107: Uploading Pictures

    Uploading Pictures You can upload your pictures to smartphones or tablets (smart devices) or computers. Options for doing so are listed below. For more information, see the following in the Reference Manual: “Connecting to Computers and TVs”, “Built-in Wireless”, and “Ethernet/WT-6”. Uploading Pictures to Smart Devices Use the SnapBridge app to upload pictures using the camera’s built-in Wi-Fi or Bluetooth.
  • Page 108 ❚❚ The WT-6 Wireless Transmitter Use the optional WT-6 wireless transmitter to connect to wireless networks and upload pictures to computers or ftp servers. The WT-6 offers more reliable wireless connections than the camera’s built-in Wi-Fi. ❚❚ Ethernet Connect to networks using an Ethernet cable attached to the camera’s Ethernet connector and upload pictures to computers or ftp servers.
  • Page 109 The SnapBridge app is available from the Apple App Store® and on Google Play™. • Nikon computer software is available from the Nikon Download Center. Check the version and system requirements and be sure to download the latest version. https://downloadcenter.nikonimglib.com/...
  • Page 110: Camera Controls The G Button

    Camera Controls The G Button Press the G button to view the menus. D [PLAYBACK MENU] C [PHOTO SHOOTING MENU] 1 [MOVIE SHOOTING MENU] A [CUSTOM SETTING MENU] B [SETUP MENU] N [RETOUCH MENU] O [MY MENU] / m [RECENT SETTINGS] d Help icon Current settings...
  • Page 111: Using The Menus

    Using the Menus You can navigate the menus using the multi selector and J button. Move cursor up Move cursor down Center of multi selector: select Cancel and return to previous highlighted item menu, or move cursor left J button: select highlighted Display sub-menu, select highlighted item, or move item...
  • Page 112 Select a menu. Press 1 or 3 to select the desired menu. Position the cursor in the selected menu. Press 2 to position the cursor in the selected menu. The G Button...
  • Page 113 Highlight a menu item. Press 1 or 3 to highlight a menu item. Display options. Press 2 to display options for the selected menu item. The G Button...
  • Page 114 Highlight an option. Press 1 or 3 to highlight an option. Select the highlighted option. • Press J . • To exit without making a selection, press the G button. • To exit the menus and return to shooting mode, press the shutter- release button halfway.
  • Page 115 D The J Button While pressing 2 or the center of the multi selector generally has the same effect as pressing J , there are some items for which selection can only be made by pressing J . D Grayed-Out Items •...
  • Page 116 D Text Entry A keyboard is displayed when text entry is required. Enter text as described below. Text display area Keyboard area Keyboard selection • Enter characters at the current cursor position by highlighting them with the multi selector arrow keys and then pressing the center of the multi selector.
  • Page 117 A The d (Help) Icon • Where available, a description of the currently-selected item can be viewed by pressing the g ( h / Q ) button. • Press 1 or 3 to scroll. • Press g ( h / Q ) again to return to the menus. A Touch Controls You can also navigate the menus using touch controls ( 0 25).
  • Page 118: The I Button (The I Menu)

    The i Button (the i Menu) For quick access to frequently-used settings, press the i button or tap the i icon in the live-view display to view the i menu. • Highlight items using the multi selector and press the center of the multi selector to view options.
  • Page 119 D Grayed-Out Items Some items and menu options may be unavailable depending on camera status. Unavailable items are displayed in gray and cannot be selected. A The Command Dials • The main command dial can be used to choose the setting for the item currently highlighted in the i menu.
  • Page 120: The Still Photography I Menu

    The Still Photography i Menu Pressing the i button during still photography displays the items listed below. Highlight the desired item using the multi selector and press J to view options. 1 2 3 4 5 6 9 10 11 12 Viewfinder photography Live view photography Set Picture Control...
  • Page 121 A Customizing the i Menu Choose the items displayed in the i menus. Use Custom Settings f1 [Customize i menu] and f2 [Customize i menu (Lv)] to choose the items displayed in viewfinder and live photography, respectively. The i Button (the i Menu)
  • Page 122: The Movie I Menu

    The Movie i Menu Pressing the i button during movie recording displays the items listed below. Highlight the desired item using the multi selector and press J to view options. 1 2 3 4 5 6 9 10 11 12 Set Picture Control White balance Frame size and rate/image...
  • Page 123: The Playback I Menu

    The Playback i Menu Pressing the i button during playback displays a context- sensitive i menu of frequently-used playback options. Photo playback Movie playback Movie playback paused The i Button (the i Menu)
  • Page 124: The R Button

    The R Button Use the R button to view shooting information or choose the indicators displayed. Viewfinder Photography During viewfinder photography, you can press the R button to view an information display in the monitor. The display lists such data as shutter speed, aperture, number of exposures remaining, and AF-area mode.
  • Page 125: Live View Photography

    Live View Photography Use the R button to cycle through the following displays: ❚❚ Live View Selector Rotated to C Indicators on Simplified display Histogram Virtual horizon * Displayed during exposure preview only. The R Button...
  • Page 126 ❚❚ Live View Selector Rotated to 1 Indicators on Simplified display Histogram Virtual horizon The R Button...
  • Page 127: The Focus-Mode Selector

    The Focus-Mode Selector Choose AF for autofocus, M for manual focus. The Focus-Mode Selector...
  • Page 128: The Af-Mode Button

    The AF-Mode Button Choose the AF and AF-area modes. The AF mode determines how the camera focuses in autofocus mode, the AF-area mode how the camera selects the focus point for autofocus. Choosing an AF Mode Hold the AF-mode button and rotate the main command dial. The options available vary with camera settings.
  • Page 129 ❚❚ Viewfinder Photography During viewfinder photography, the selected AF mode is displayed in the top control panel and viewfinder. Option Description Use with stationary subjects. Focus locks while AF-S [Single AF] the shutter-release button is pressed halfway. For moving subjects. The camera adjusts focus [Continuous continuously in response to changes in the AF-C...
  • Page 130 ❚❚ Live View Photography and Filming During live view photography and filming, the selected AF mode is displayed in the monitor. Option Description Use with stationary subjects. Focus locks while AF-S [Single AF] the shutter-release button is pressed halfway. For moving subjects. The camera adjusts focus continuously in response to changes in the AF-F [Full-time AF] distance to the subject until the shutter-release...
  • Page 131: Choosing An Af-Area Mode

    Choosing an AF-Area Mode Hold the AF-mode button and rotate the sub-command dial. The options available vary with the AF mode. The AF-Mode Button...
  • Page 132 ❚❚ Viewfinder Photography The selected AF-area mode is displayed in the top control panel and viewfinder during viewfinder photography. Option Description The camera focuses on a point selected by the user. [Single-point AF] • Use with stationary subjects. The camera focuses on a point selected by the user; [Dynamic-area AF if the subject briefly leaves the selected point, the (9 points)]/...
  • Page 133 Option Description The camera focuses using a group of focus points selected by the user. • Choose for snapshots, subjects that are in motion, and other subjects that are difficult to photograph using [Single-point AF]. [Group-area AF]/ • Use [Group-area AF (C1)] and [Group-area AF [Group-area AF (C2)] to create custom groups in which the (C1)]/[Group-area...
  • Page 134 A Custom Focus Groups: [Group-Area AF (C1)]/[Group-Area AF (C2)] • When [Group-area AF (C1)] or [Group-area AF (C2)] is highlighted, you can adjust the width of the custom focus group by holding the AF-mode button and pressing 4 or 2 . Press 1 or 3 to choose the height. The height and width are shown in the top control panel.
  • Page 135 ❚❚ Live View Photography/Movie Recording The selected AF-area mode is displayed in the monitor during live view photography and filming. Option Description The camera automatically detects and focuses on portrait subjects; the selected subject is indicated [Face- by a yellow border. If multiple faces (up to a priority AF] maximum of 16) are detected, you can choose a subject using the multi selector.
  • Page 136 ❚❚ Manual Focus-Point Selection When an option other than [Auto-area AF], [Face-priority AF], or [Subject- tracking AF] is selected for AF-area mode, you can select the focus point manually. Press the multi selector up, down, left, or right ( 1342 ) or diagonally to select the focus point.
  • Page 137: The Af-On Button

    The AF-ON Button The AF-ON button can be used for focus in autofocus mode. • You can choose the role assigned to the AF-ON button. Use Custom Settings f3 [Custom controls] and g2 [Custom controls] in the Custom Settings menu to choose the roles played by the button during photography and movie recording, respectively.
  • Page 138: The I Button

    The I Button Choose an exposure mode. Choosing an Exposure Mode Hold the I button and rotate the main command dial. Mode Description Programmed The camera sets shutter speed and aperture for auto optimal exposure. Shutter- You choose the shutter speed; the camera priority auto selects the aperture for best results.
  • Page 139: The Release Mode Dial And S Button

    The Release Mode Dial and S Button Rotate the release mode dial to choose the operation performed when the shutter is released. Choosing a Release Mode Press the release mode dial lock release on top of the camera and rotate the release mode dial.
  • Page 140 Mode Description Take pictures more quietly than in single- Quiet shutter frame mode. Burst shooting at rates of 1 to 5 release fps is also supported. Self-timer Take pictures with the self-timer. The mirror is raised before shooting to Mirror up minimize blur caused by camera shake.
  • Page 141: The Y Button

    The Y Button Use the Y button to choose how the camera meters light when setting exposure. Choosing a Metering Option Hold the Y button and rotate the main command dial. Option Description [Matrix Matrix metering is adapted to a wide range of metering] subjects.
  • Page 142 Option Description The camera meters a circle 4 mm (0.16 in.) in diameter (approximately 1.5% of frame). Use for [Spot example to meter a specific area of the frame when metering] your subject is backlit or features sharply contrasting areas. The camera assigns the greatest weight to [Highlight- highlights.
  • Page 143: The Bkt Button

    The BKT Button Use the BKT button to choose the bracketing increment and number of shots in the bracketing program. Bracketing is used to vary exposure, flash level, white balance, or Active D-Lighting (ADL) over a series of shots. • The role performed by the BKT button can be chosen using Custom Setting f3 [Custom controls].
  • Page 144: The S ( Q ) Button

    The S ( Q ) Button Use the S ( Q ) button to adjust the camera’s sensitivity to light (ISO sensitivity). The higher the ISO sensitivity, the less light needed to make an exposure, allowing faster shutter speeds or smaller apertures.
  • Page 145 D High ISO Sensitivities The higher the ISO sensitivity, the less light needed to make an exposure, allowing pictures to be taken when lighting is poor and helping prevent blur when the subject is in motion. Note, however, that the higher the sensitivity, the more likely the image is to be affected by “noise”...
  • Page 146: Enabling Auto Iso Sensitivity Control

    Enabling Auto ISO Sensitivity Control Hold the S ( Q ) button and rotate the sub-command dial to choose whether the camera will automatically adjust ISO sensitivity if the desired exposure cannot be achieved at the value selected by the user. •...
  • Page 147: The E Button

    The E Button Use the E (exposure compensation) button to alter exposure from the value suggested by the camera. Exposure compensation can be used to make pictures brighter or darker. −1 EV No exposure +1 EV compensation Adjusting Exposure Compensation Hold the E button and rotate the main command dial.
  • Page 148: The T Button

    The T Button The T button is used to adjust image quality and choose the size of JPEG images. Adjusting Image Quality Hold the T button and rotate the main command dial. Option Description [NEF (RAW) + JPEG fine c ] Record two copies of each photo: an NEF [NEF (RAW) + JPEG fine] (RAW) image and a JPEG copy.
  • Page 149 Option Description [JPEG fine c ] Record photos in JPEG format. Image [JPEG fine] quality increases as quality progress from [JPEG normal c ] basic through normal to fine. Options [JPEG normal] with a star (“ c ”) prioritize image quality, [JPEG basic c ] those without a star (“...
  • Page 150: Choosing An Image Size

    Choosing an Image Size Hold the T button and rotate the sub-command dial. • Choose from [Large], [Medium], and [Small]; the selected option applies to JPEG photos. The physical dimensions of the photos in pixels varies with image area. Image size Image area [Large] [Medium]...
  • Page 151: The U Button

    The U Button The U button can be used to adjust white balance. White balance delivers natural colors with light sources of different hues. Adjusting White Balance Hold the U button and rotate the main command dial. Options for the selected setting, if any, can be selected by holding the U button and rotating the sub-command dial.
  • Page 152 Option Description White balance is adjusted automatically v [Auto] for optimal results with most light sources. v 0 [Keep white Eliminate the warm color cast produced (reduce warm colors)] by incandescent lighting. v 1 [Keep overall Partially preserve the warm color cast atmosphere] produced by incandescent lighting.
  • Page 153 Option Description I [Fluorescent] [Sodium-vapor lamps] [Warm-white fluorescent] Use under fluorescent lighting; choose [White fluorescent] the bulb type according to the light [Cool-white fluorescent] source. [Day white fluorescent] [Daylight fluorescent] [High temp. mercury- vapor] N [Flash] Use for flash photography. K [Choose color Choose the color temperature directly.
  • Page 154 A Fine-Tuning White Balance To fine-tune white balance, use the multi selector while holding the U button. • When an option other than [Choose color temperature] or [Preset manual] is selected, you can fine-tune white balance on the amber-blue axis by pressing 4 or 2 and on the green-magenta axis by pressing 1 or 3 .
  • Page 155: The G ( H / Q ) Button

    The g ( h / Q ) Button Use the g ( h / Q ) button to choose image processing (“Picture Control”) options for new photos according to the scene or your creative intent. Choosing a Picture Control Pressing the g ( h / Q ) button displays Picture Control options.
  • Page 156 Option Description Smooth complexions for natural-looking o [Portrait] portraits. p [Landscape] Shoot vibrant landscapes and cityscapes. Details are preserved over a wide tone range, from highlights to shadows. Choose for q [Flat] photographs that will later be extensively processed or retouched. Creative Picture Controls offer unique l 01 Creative...
  • Page 157 ❚❚ Modifying Picture Controls To modify Picture Control settings, highlight a Picture Control and press 3 . • Press 1 or 3 to highlight settings. Press 4 or 2 to choose a value in increments of 1, or rotate the sub- command dial to choose a value in increments of 0.25.
  • Page 158 ❚❚ Picture Control Settings Option Description Mute or heighten the effect of Creative Picture [Effect level] Controls. Quickly adjust levels for balanced [Sharpening], [Mid- [Quick sharp] range sharpening], and [Clarity]. These parameters can also be adjusted individually. [Sharpening] Control the sharpness of details and outlines. [Mid-range Adjust the sharpness of patterns and lines in the range sharpening]...
  • Page 159 D The j Indicator The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. D [A] (Auto) • Selecting the [A] (auto) option available for some settings lets the camera adjust the setting automatically. •...
  • Page 160 A The [Auto] Picture Control Settings can be adjusted in the range [A−2] to [A+2]. A Protecting Pictures from Deletion During playback, the g ( h / Q ) button can be used to protect pictures. Protecting pictures helps prevent accidental deletion. A Viewing Help Press the g ( h / Q ) button to view help for the current item, where available ( 0 87).
  • Page 161: The W ( N ) Button

    The W ( N ) Button During shooting, the W ( N ) button can be used to choose the flash mode and adjust flash compensation for optional flash units. Flash mode determines the effect produced by the flash, flash compensation the flash level. Choosing a Flash Mode Hold the W ( N ) button and rotate the main command dial.
  • Page 162 Option Description As for “red-eye reduction”, except that slow [Slow sync + red- eye] (red-eye shutter speeds are used to capture reduction with background lighting at night or under low slow sync) light. [Rear-curtain sync] (rear-curtain The flash fires just before the shutter closes. sync) [Flash off] The flash does not fire.
  • Page 163: Adjusting Flash Compensation

    Adjusting Flash Compensation Hold the W ( N ) button and rotate the sub-command dial. • Choose positive values for brighter lighting, negative values to ensure that the subject is not too brightly lit. • Normal flash output can be restored by setting flash compensation to ±0.0.
  • Page 164: The Pv Button

    • Optional flash units compatible with the Nikon Creative Lighting System (CLS) will emit a modeling flash. The modeling flash can be disabled by selecting [Off] for Custom Setting e6 [Modeling flash].
  • Page 165: The Fn1, Fn2, Fn3 ( C ), And Fn (Vertical) Buttons

    The Fn1, Fn2, Fn3 ( C ), and Fn (Vertical) Buttons Use the Fn1, Fn2, Fn3 ( C ), or vertical Fn button for quick access to selected settings. • The assigned setting can be adjusted by holding the corresponding button and rotating the command dials. In some cases, adjustments can be made using both the main and sub-command dials.
  • Page 166: Troubleshooting Before Contacting Customer Support

    Before Contacting Customer Support You may be able to resolve any issues with the camera by following the steps below. Check this list before consulting your retailer or Nikon-authorized service representative. Check the common problems listed in the following STEP sections: “Problems and Solutions”...
  • Page 167 D Restoring Default Settings • Depending on current settings, some menu items and other features may be unavailable. To access menu items that are grayed out or features that are otherwise unavailable, try restoring default settings using the [Reset all settings] item in the setup menu. •...
  • Page 168: Problems And Solutions

    Problems and Solutions Solutions to some common issues are listed below. Battery/Display The camera is on but does not respond: ● • Wait for recording and other operations to end. • If the problem persists, turn the camera off. • If the camera does not turn off, remove and reinsert the battery.
  • Page 169 The viewfinder is dark: ● Is the battery charged? The viewfinder may dim if the battery is exhausted or not inserted ( 0 28, 47). The display in the viewfinder, control panel, or monitor turns off ● without warning: Choose longer delays for Custom Setting c2 [Standby timer] or c4 [Monitor off delay].
  • Page 170: Shooting

    Shooting The camera takes time to turn on: ● More time will be needed to find files if the memory card contains large numbers of files or folders. The shutter cannot be released: ● • Is a memory card inserted, and if so, does it have space available? •...
  • Page 171 Photos are out of focus: ● • Is the camera in manual focus mode? To enable autofocus, rotate the focus-mode selector to AF. • Autofocus does not perform well under the following conditions. In these cases, use manual focus or focus lock. Autofocus does not perform well if: there is little or no contrast between the subject and the background, the focus point contains objects at different distances from the camera, the subject is dominated by regular...
  • Page 172 Focus does not lock when the shutter-release button is pressed ● halfway: If AF-C is selected for autofocus mode, focus can be locked by pressing the center of the sub-selector. Focus-point selection is not available: ● • Is the focus selector lock in the L (lock) position? •...
  • Page 173 “Noise” (bright spots, randomly-spaced bright pixels, fog, or ● lines) appears in photos: • To reduce noise, adjust settings such as ISO sensitivity, shutter speed, or Active D-Lighting. • At high ISO sensitivities, noise may become more noticeable in long exposures or in pictures recorded when the camera temperature is elevated.
  • Page 174 Photographs and movies do not appear to have the same ● exposure as the preview shown in the monitor during live view: Changes to monitor brightness during live view have no effect on images recorded with the camera. Flicker or banding appears in the display during movie recording: ●...
  • Page 175 “Noise” (bright spots, randomly-spaced bright pixels, fog, or ● lines) appears during live view: • Randomly-spaced bright pixels, fog, or bright spots may arise as a result of increases in the temperature of the camera’s internal circuits during live view. Exit live view when the camera is not in use. •...
  • Page 176 White balance (WB) bracketing is unavailable: ● • White balance bracketing is not available when an NEF (RAW) or NEF + JPEG option is selected for image quality. • White balance bracketing cannot be used in multiple exposure and HDR modes. The effects of [Set Picture Control] differ from image to image: ●...
  • Page 177: Playback

    Playback NEF (RAW) pictures are not visible during playback: ● The camera displays only the JPEG copies of pictures taken with [NEF (RAW) + JPEG fine c ], [NEF (RAW) + JPEG fine], [NEF (RAW) + JPEG normal c ], [NEF (RAW) + JPEG normal], [NEF (RAW) + JPEG basic c ], or [NEF (RAW) + JPEG basic] selected for [Image quality].
  • Page 178 The effects of [Set Picture Control], [Active D-Lighting], or ● [Vignette control] are not visible: In the case of NEF (RAW) images, the effect can only be viewed using Nikon software. View NEF (RAW) images using Capture NX-D or ViewNX-i. Pictures cannot be copied to a computer: ●...
  • Page 179: Bluetooth And Wi-Fi (Wireless Networks)

    Bluetooth and Wi-Fi (Wireless Networks) Smart devices do not display the camera SSID (network name): ● • Navigate to the setup menu and confirm both that [Disable] is selected for [Airplane mode] and that [Enable] is selected for [Connect to smart device] > [Pairing (Bluetooth)] > [Bluetooth connection].
  • Page 180: Alerts And Error Messages

    Alerts and Error Messages This section lists the alerts and error messages that appear in the viewfinder, top control panel, and monitor. Alerts The following alerts appear in the top control panel and viewfinder: Alert Problem/solution control Viewfinder panel Lens aperture ring is not set to minimum aperture.
  • Page 181 Battery exhausted. • Replace with spare battery. • Charge battery. Battery info not available. • Battery cannot be used. Contact Nikon- authorized service representative. • Battery level is extremely low; charge battery. (flashes) (flashes) Battery cannot supply data to camera.
  • Page 182 Alert Problem/solution control Viewfinder panel Camera unable to focus using autofocus. — (flashes) Change composition or focus manually. A (Bulb) selected in mode S. • Change shutter speed. (flashes) (flashes) • Select mode M. % (Time) selected in mode S. •...
  • Page 183 Alert Problem/solution control Viewfinder panel Subject too bright; limits of camera exposure metering system exceeded. • Lower ISO sensitivity. • Mode P: Use third-party ND (neutral density) filter (filter can also be used if alert is still displayed after following settings are adjusted in mode S or A).
  • Page 184 Copy pictures you wish to keep to computer or other device before proceeding. • Insert new memory card. Camera malfunction. Press shutter-release button again. If error (flashes) (flashes) persists or appears frequently, consult Nikon- authorized service representative. Alerts and Error Messages...
  • Page 185: Error Messages

    Check that camera supports memory card. • If error persists after card has been repeatedly ejected and reinserted, card may be damaged. Contact retailer or Cannot access Nikon-authorized service representative. this memory card. Unable to create new folder. Insert another (flashes) •...
  • Page 186 Alert Problem/solution Monitor control panel This card is not Memory card is not correctly formatted. • Format memory card. formatted. • Format the (flashes) Replace with correctly-formatted memory card. card. Unable to start Camera’s internal temperature is live view. Please —...
  • Page 187 Alert Problem/solution Monitor control panel File has been modified using computer application or does not conform to DCF file standard. Do not overwrite images using computer Cannot display — applications. this file. File is corrupt. Do not overwrite images using computer applications.
  • Page 188 Alert Problem/solution Monitor control panel This file cannot Files 4 GB or larger can only be saved to be saved to the memory cards formatted for exFAT. They destination cannot be saved to cards formatted for memory card. — other file systems, such as FAT32. See the Use a memory card with a capacity over camera's user's...
  • Page 189: Technical Notes

    Technical Notes Camera Displays For illustrative purposes, the displays are shown with all indicators lit. The Viewfinder 1, 2 Roll indicator Focus points Spot metering targets Framing grid AF-area mode indicator AF-area brackets Flicker detection 12-mm reference circle for Teleconverter indicator center-weighted metering 1, 5 Pitch indicator...
  • Page 190 1 Displayed by pressing button to which [Viewfinder virtual horizon] has been assigned using Custom Setting f3 ([Custom controls]). 2 Functions as a pitch indicator when the camera is rotated to take pictures in “tall” (portrait) orientation. 3 Displayed when [On] is selected for Custom Setting d11 [Framing grid display].
  • Page 191 Exposure indicator Bracketing indicator Exposure Exposure and flash Exposure compensation bracketing Exposure and flash WB bracketing bracketing progress ADL bracketing indicator Flash compensation indicator Exposure compensation indicator Camera Displays...
  • Page 192 2 3 4 5 7 8 9 11 12 1314 18 17 Focus indicator ISO sensitivity indicator Auto ISO sensitivity indicator Metering ISO sensitivity Autoexposure (AE) lock Active D-Lighting amount Exposure mode AF-area mode Shutter speed lock icon Network display Shutter speed Autofocus mode Aperture lock icon...
  • Page 193 Number of exposures “k” (appears when memory remaining remains for over 1000 Number of shots remaining exposures) Flash-ready indicator before memory buffer fills Preset white balance Low battery warning recording indicator Aperture stop indicator Exposure compensation value Flash sync indicator Flash compensation value FV lock indicator PC mode indicator...
  • Page 194: The Information Display

    The Information Display Exposure mode “k” (appears when memory remains for over 1000 Flexible program indicator exposures) Shutter speed lock icon Number of exposures Flash sync indicator remaining Shutter speed Exposure indicator Aperture stop indicator Exposure Exposure compensation Aperture lock icon Exposure and flash Aperture (f-number) bracketing...
  • Page 195 8 9 10 1112 13 Bluetooth connection Flash control mode indicator FP indicator Airplane mode “Beep” indicator Wi-Fi connection indicator Battery indicator Track log indicator i menu display area Satellite signal indicator Guide Long exposure noise Autoexposure (AE) lock reduction indicator Flash compensation indicator Vignette control indicator FV lock indicator...
  • Page 196 D The ! Icon A flashing ! icon indicates that the camera clock has been reset. The date and time recorded with new photographs will not be correct; use the [Time zone and date] > [Date and time] option in the setup menu to set the clock to the correct time and date.
  • Page 197: Live View (Still Photography/Movies)

    Live View (Still Photography/Movies) ❚❚ Still Photography 8 9 11 Exposure mode Active D-Lighting Flexible program indicator Picture Control “No memory card” indicator Wi-Fi connection indicator Subject tracking AF White balance Focus point “Auto white balance locked” indicator Autofocus mode AF-area mode Camera Displays...
  • Page 198 Image area Number of exposures remaining Exposure and flash bracketing Satellite signal indicator indicator ISO sensitivity WB bracketing indicator ADL bracketing indicator ISO sensitivity indicator HDR indicator Auto ISO sensitivity indicator Multiple exposure indicator Exposure compensation Position of current frame in indicator exposure/flash bracketing Flash compensation indicator...
  • Page 199 Touch shooting Photo live view display WB Time remaining Temperature warning D Temperature Warnings • If the camera temperature becomes elevated, a temperature warning and count-down timer will be displayed. When the timer reaches zero, the monitor will turn off. •...
  • Page 200 ❚❚ Filming Recording indicator Headphone volume “No movie” indicator Release mode (still External recording control photography) Frame size and rate/image Sound level quality Microphone sensitivity Time remaining Frequency response Time code Electronic VR indicator Wind noise reduction Camera Displays...
  • Page 201: The Top Control Panel

    The Top Control Panel Shutter speed Exposure mode AF-area mode AF-area mode indicator Exposure compensation value Photo shooting menu bank Flash compensation value Custom settings bank Number of shots in exposure Autofocus mode and flash bracketing sequence Bluetooth connection Number of shots in WB indicator bracketing sequence Memory card icon (Slot 2)
  • Page 202 Shutter-speed lock icon Aperture (f-number) Aperture (number of stops) Flash sync indicator Bracketing increment Exposure indicator (exposure and flash Exposure bracketing) Exposure compensation Bracketing increment (WB Exposure and flash bracketing) bracketing Number of shots in ADL WB bracketing bracketing sequence ADL bracketing Number of shots per interval ISO sensitivity indicator...
  • Page 203 Bracketing indicator “k” (appears when memory Exposure and flash remains for over 1000 bracketing exposures) Number of exposures WB bracketing ADL bracketing remaining Flash mode Number of shots remaining before memory buffer fills Metering Preset white balance Frame count recording indicator ISO sensitivity Active D-Lighting amount White balance preset number...
  • Page 204: The Rear Control Panel

    The Rear Control Panel Image size (NEF/RAW) “k” (appears when memory Size for JPEG images recorded remains for over 1000 to card in Slot 2 exposures) Release mode Color temperature indicator Supplementary seconds Voice memo status indicator display Voice memo recording mode “Remaining”...
  • Page 205: Compatible F Mount Lenses

    Compatible F Mount Lenses CPU lenses are recommended (but note that IX-NIKKOR lenses cannot be used). Types G, E, and D, which grant access to a full range of camera features, are particularly recommended. CPU lenses Exposure Metering mode Lens /accessory Autofocus Type G, E, or D...
  • Page 206 [Spot metering] meters the selected focus point. Fog, lines, and other image artifacts (“noise”) may appear in photos taken with the electronic front-curtain shutter. This can be prevented by selecting [Disable] for Custom Setting d6 [Electronic front-curtain shutter]. Cannot be used with shifting or tilting.
  • Page 207 D Lens f-Number The f-number is a measure of lens “speed”, its maximum (widest) aperture. It appears at the end of the lens name, for example as “f/2.8” or “f/3.5–5.6”. D VR Lenses The lenses listed below are not recommended for long exposures or photographs taken at high ISO sensitivities, as due to the design of the vibration reduction (VR) control system the resulting photos may be marred by fog.
  • Page 208 D Calculating Angle of View The camera can be used with Nikon lenses for 35 mm format cameras. If a 35 mm format lens or a lens that supports the FX format is attached, the angle of view will be the same as a frame of 35 mm film.
  • Page 209 D Cross Sensors The availability of cross-sensor focus points varies with the lens used. Cross sensors (cross- Lens sensor focus points highlighted in gray AF-S and AF-P lenses other than those listed below with maximum apertures of f/4 or faster 105 cross sensors •...
  • Page 210 D AF-S/AF-I Teleconverters and Available Focus Points When an AF-S or AF-I teleconverter is attached, the focus points shown in the illustrations can be used during viewfinder photography for autofocus and electronic rangefinding (note that at maximum combined apertures slower than f/5.6, the camera may not be able to focus on dark or low-contrast subjects).
  • Page 211 Available focus points Max. lens Teleconverter (cross-sensor focus points aperture highlighted in gray TC-17E II TC-800-1.25E ED f/5.6 • 23 focus points • 9 cross sensors TC-20E, TC-20E II, TC-20E III TC-14E, TC-14E II, TC-14E III f/5.6 • 15 focus points •...
  • Page 212 A Recognizing CPU and Type G, E, and D Lenses CPU lenses can be identified by the presence of CPU contacts ( ). Type G lenses are marked with a “G”, type E lenses with an “E”, and type D lenses with a “D”.
  • Page 213: Non-Cpu Lenses And Other Accessories

    Non-CPU lenses and Other Accessories Exposure Metering mode Lens /accessory AI-, AI-modified NIKKOR or Nikon — — — Series E lenses Medical-NIKKOR 120mm f/4 — — — — — Reflex-NIKKOR — — — — PC-NIKKOR — — — — AI-type Teleconverter —...
  • Page 214 Can be used only if the lens focal length and maximum aperture are specified using the [Non-CPU lens data] item in the setup menu. Some lenses may, however, fail to produce the desired results even if the focal length and maximum aperture are supplied. Use [Spot metering] or [Center-weighted metering] if the desired results are not achieved.
  • Page 215 D Incompatible Lenses and Accessories The following non-CPU lenses and accessories cannot be used. Attempting to mount them on the camera could damage the camera or lens. • TC-16A AF teleconverters • Non-AI lenses (lenses with pre-AI exposure couplings) • Lenses that require the AU-1 focusing unit (400mm f/4.5, 600mm f/5.6, 800mm f/8, 1200mm f/11) •...
  • Page 216 A Compatible Non-CPU Lenses • Specifying the lens focal length and maximum aperture using the [Non- CPU lens data] item in the setup menu allows many of the features available with CPU lenses, including aperture value display and color matrix metering, to be used with non-CPU lenses. If the focal length and maximum aperture are not provided and [Matrix metering] is selected for metering, [Center-weighted metering] will be used instead.
  • Page 217: The Electronic Rangefinder

    The Electronic Rangefinder The conditions under which the electronic rangefinder can be used vary with the lens. ❚❚ CPU lenses Viewfinder Lens/accessory Live view photography Type G, E, or D; AF-S, AF-P, AF-I — PC NIKKOR 19mm f/4E ED — PC-E NIKKOR series —...
  • Page 218 ❚❚ Non-CPU Lenses and Other Accessories Viewfinder Lens/accessory Live view photography AI-, AI-modified NIKKOR or Nikon — Series E lenses Medical-NIKKOR 120mm f/4 — Reflex-NIKKOR — — PC-NIKKOR — AI-type Teleconverter — PB-6 Bellows Focusing Attachment — Auto extension rings (PK-series 11A, —...
  • Page 219: Compatible Flash Units

    Compatible Flash Units The Nikon Creative Lighting System (CLS) Nikon’s advanced Creative Lighting System (CLS) supports a variety of features thanks to improved communication between the camera and compatible flash units. ❚❚ Features Available with CLS-Compatible Flash Units Flash unit...
  • Page 220 Flash unit Supported features 4 — 4 4 — — — Remote flash control 4 — 4 i-TTL i-TTL — — — — Quick wireless 4 — — 4 [A : B] — — — — flash control Auto aperture 4 —...
  • Page 221 Flash unit Supported features Radio-controlled Advanced — — — — — — — — Wireless Lighting Color Information 4 4 4 — — 4 4 Communication (flash) Color Information — — 4 — — — — — — Communication (LED light) 4 4 4 4 4 —...
  • Page 222 Not available with spot metering. Can also be selected via the flash unit. q A/A mode selection is performed on the flash unit using custom settings. Can be selected using the [Flash control] item in the camera menus. Available during close-up photography only. Choice of q A and A depends on the option selected with the master flash.
  • Page 223 ❚❚ The SU-800 Wireless Speedlight Commander When mounted on a CLS-compatible camera, the SU-800 can be used as a commander for SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, or SB-R200 flash units. Group flash control is supported for up to three groups. The SU-800 itself is not equipped with a flash.
  • Page 224 D Metering Areas for FV Lock The areas metered when FV lock is used with optional flash units are as follows: Picture taken with Flash control mode Metered area 6-mm circle in center i-TTL of frame Stand-alone flash unit Area metered by flash Auto aperture ( q A) exposure meter Remote flash units...
  • Page 225 • At ISO sensitivities over 12800, the desired results may not be achieved at some ranges or aperture settings. • In mode P, the maximum aperture (minimum f-number) is limited according to ISO sensitivity, as shown below: Maximum aperture (f-number) at ISO equivalent of: 1600 3200 6400...
  • Page 226 • During viewfinder photography, the focus points for which AF illumination is available vary with focal length. Examples of focus points for which AF-assist Flash unit illumination is available Focal length 24 mm Focal length 135 mm SB-5000 Focal length 17 mm Focal length 135 mm SB-910/ SB-900...
  • Page 227 • When an SC-series 17, 28, or 29 sync cable is used for off-camera flash photography, correct exposure may not be achieved in i-TTL mode. We recommend that you select standard i-TTL fill-flash. Take a test shot and view the results in the monitor. •...
  • Page 228: Other Compatible Accessories

    ● • EN-EL18c Rechargeable Li-ion Battery: EN-EL18c batteries can be used with Nikon D6 digital cameras. EN-EL18c batteries can be charged and calibrated using MH-26a battery chargers. - EN-EL18b/EN-EL18a/EN-EL18 batteries can also be used. Note, however, that fewer pictures can be taken on a single charge with an EN-EL18 than with an EN-EL18c/EN-EL18b/EN-EL18a ( 0 263).
  • Page 229 Accessory Shoe Covers ● BS-3/BS-1 Accessory Shoe Covers: Accessory shoe covers protect the accessory shoe when no flash unit is attached ( 0 204). Body Caps ● BF-1B Body Cap/BF-1A Body Cap: Body caps prevent dust entering the camera when no lens is in place. Viewfinder Eyepiece Accessories ●...
  • Page 230 • DK-17F Fluorine-Coated Finder Eyepiece: A DK-17F is supplied with the camera. The protective glass features Nikon’s unique, easy-to-clean fluorine coating on both surfaces. • DR-5 Right-Angle Viewing Attachment: The DR-5 attaches to the viewfinder eyepiece at a right angle, allowing the image in the viewfinder to be viewed from above when the camera is used to take pictures in “wide”...
  • Page 231 (WR-R10 firmware version 3.0 or later and WR-1 firmware version 1.0.1 or later). For information on firmware updates, see the Nikon website for your area. Consult a Nikon-authorized service representative when updating the firmware for the WR-R10 from versions prior to version 2.0 to version 3.0 or later.
  • Page 232 Remote Terminal Accessories ● The camera is equipped with a ten-pin remote terminal for remote control and automatic photography. Be sure to replace the terminal cap when the terminal is not in use. Dust or other foreign matter accumulating in the terminal contacts could cause the camera to malfunction.
  • Page 233 USB Cables ● • UC-E24 USB Cable: A USB cable with a type C connector for connection to the camera and a type A connector for connection to the USB device. • UC-E25 USB Cable: A USB cable with two type C connectors. HDMI Cables ●...
  • Page 234 D Compatible Accessories • Availability may vary with country or region. • See our website or brochures for the latest information. D The BS-3 Accessory Shoe Cover The supplied accessory shoe cover can be used to protect the accessory shoe or to prevent light reflected from the metal parts of the shoe appearing in photographs.
  • Page 235 D Attaching Diopter-Adjustment Viewfinder Lenses Remove the DK-17F viewfinder eyepiece before attaching a diopter-adjustment viewfinder lens. Press the latches on both sides of the eyepiece adapter simultaneously to release the eyepiece lock ( ) and then unscrew the eyepiece as shown ( D Removing the Eyepiece Adapter Press and lift the latches on both sides simultaneously (...
  • Page 236 D The HDMI/USB Cable Clip To prevent accidental disconnection, attach the supplied clip to HDMI cables or to the supplied USB cable as shown (note that the clip may not fit all third-party HDMI cables). The illustrations show the USB cable. USB cable HDMI cable HDMI cable and USB...
  • Page 237: Attaching A Power Connector And Ac Adapter

    Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connector and AC adapter. Remove the BL-6 battery- chamber cover. Lift the battery-chamber cover latch, turn it to the open ( A ) position ( and remove the BL-6 battery- chamber cover ( Connect the EH-6c AC adapter to the EP-6 power...
  • Page 238 Insert the power connector. Fully insert the power connector into the battery chamber as shown. Latch the power connector. • Rotate the latch to the closed position ( ) and fold it down as shown ( • To prevent the power connector being dislodged during operation, be sure that it is securely latched.
  • Page 239: Software

    (RAW) formats or convert them to JPEG or TIFF (NEF/RAW processing). Capture NX-D can be used not only with NEF/NRW (RAW) pictures but also with JPEG and TIFF photos shot with Nikon digital cameras for such tasks as editing tone curves and enhancing brightness and contrast.
  • Page 240 Smartphone (Tablet) Apps ● Smartphone apps can be downloaded from the Apple App Store® or on Google Play™. Visit the Nikon website for the latest information. SnapBridge: Download photos and movies from the camera to your smart device via a wireless connection.
  • Page 241: Caring For The Camera

    Caring for the Camera Storage When the camera will not be used for an extended period, remove the battery. Before removing the battery, confirm that the camera is off. Do not store the camera in locations that: • are poorly ventilated or subject to humidities of over 60% •...
  • Page 242 ❚❚ Camera Body Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampened in distilled water and dry the camera thoroughly.
  • Page 243: The Low-Pass Filter

    The Low-Pass Filter Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the low-pass filter and affect your photographs. The “clean image sensor” option vibrates the filter to remove dust. The filter can be cleaned at any time from the menus, or cleaning can be performed automatically when the camera is turned on or off.
  • Page 244 ❚❚ Cleaning the Image Sensor at Startup and/or Shutdown Option Description The image sensor is automatically cleaned 5 [Clean at startup] each time the camera is turned on. The image sensor is automatically cleaned [Clean at during shutdown each time the camera is shutdown] turned off.
  • Page 245 • Image sensor cleaning may not fully remove all foreign matter from the filter. Clean the filter manually ( 0 216) or consult a Nikon-authorized service representative. • If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera’s...
  • Page 246 Note, however, that because the filter is extremely delicate and easily damaged, we recommend that manual cleaning be performed only by a Nikon-authorized service representative. • To prevent loss of power during the operation, use a fully- charged battery or connect an optional AC adapter and power connector.
  • Page 247 Press J . • The mirror will be raised and the shutter curtain will open. • The display in the top control panel will flash. The displays in the viewfinder and rear control panel will turn off. • To restore normal operation without inspecting the low-pass filter, turn the camera off.
  • Page 248 • Dirt that cannot be removed with a blower can only be removed by Nikon-authorized service personnel. Under no circumstances should you touch or wipe the filter. Turn the camera off and replace the lens.
  • Page 249 ( 0 213), clean the low-pass filter as described in “Manual Cleaning” ( 0 216), or have the filter cleaned by authorized Nikon service personnel. Photographs affected by the presence of foreign matter on the sensor can be retouched using the clean image options available in some imaging applications.
  • Page 250 D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing; Nikon recommends that the camera be inspected once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services).
  • Page 251: Replacing The Clock Battery

    Replacing the Clock Battery The camera clock is powered by a CR1616 lithium battery. CR1616 batteries have a life of about two years. If the B icon is displayed in the top control panel while the standby timer is on, the battery is running low and needs to be replaced.
  • Page 252 Insert a new CR1616 lithium battery so that the positive side (the side marked with “+” and the battery name) is visible. Slide the clock battery chamber cover towards the back of the main battery chamber. Stop when the cover clicks into place. Reinsert the main battery.
  • Page 253: Caring For The Camera And Battery: Cautions

    Caring for the Camera and Battery: Cautions Camera Care Do Not Drop ● Do not drop the camera or lens or subject them to blows. The product may malfunction if subjected to strong shocks or vibration. Keep Dry ● Keep the camera dry. Rusting of the internal mechanism caused by water inside the camera can not only be expensive to repair but can in fact cause irreparable damage.
  • Page 254 Do Not Leave the Lens Pointed at the Sun ● Do not leave the lens pointed at the sun or other strong light source for extended periods. Intense light may damage the image sensor or cause fading or “burn in”. Photographs taken with the camera may exhibit a white blur effect.
  • Page 255 The Lens Contacts ● Keep the lens contacts clean. Do Not Touch the Shutter Curtain ● • The shutter curtain is extremely thin and easily damaged: under no circumstances should you exert pressure on the curtain, poke it with cleaning tools, or subject it to powerful air currents from a blower. These actions could scratch, deform, or tear the curtain.
  • Page 256 Turn the Product Off Before Removing or Disconnecting the Power ● Source Removing or disconnecting the power source while the camera is on could damage the product. Particular care should be taken not to remove or disconnect the power source while images are being recorded or deleted.
  • Page 257: Battery Care

    Battery Care Precautions for Use ● • If improperly handled, batteries may rupture or leak, causing the product to corrode. Observe the following precautions when handling batteries: - Turn the product off before replacing the battery. - Batteries may be hot after extended use. - Keep the battery terminals clean.
  • Page 258 • Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). Failure to observe this precaution could damage the battery or impair its performance. Charge the battery indoors at ambient temperatures of 5 °C–35 °C (41 °F–95 °F). The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
  • Page 259 Have Fully-Charged Spare Batteries Ready on Cold Days ● Partially-charged batteries may not function on cold days. In cold weather, charge one battery before use and keep another in a warm place, ready to be exchanged as necessary. Once warmed, a cold battery may recover some of its charge.
  • Page 260: Using The Charger

    Using the Charger • Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger. • Unplug the charger when it is not in use. • Use the MH-26a with compatible batteries only. •...
  • Page 261: Exposure Program

    Exposure Program The following graph shows the exposure program for mode P (ISO 100, maximum lens aperture f/1.4): f/1.4 f/2.8 f/5.6 f/11 f/16 f/22 f/32 15 1 30 1 60 1 125 1 250 1 500 1 1000 1 2000 1 4000 1 8000 1 30"...
  • Page 262: Specifications

    Specifications Nikon D6 Digital Camera Type Type Single-lens reflex digital camera Lens mount Nikon F mount (with AF coupling and AF contacts) Effective Nikon FX format angle of view Effective pixels Effective 20.8 million pixels Image sensor Type 35.9 × 23.9 mm CMOS sensor Total pixels 21.33 million...
  • Page 263 Storage • [FX (36 × 24)] selected for image area: - 5568 × 3712 (Large: 20.7 M) - 4176 × 2784 (Medium: 11.6 M) - 2784 × 1856 (Small: 5.2 M) • [1.2 × (30 × 20)] selected for image area: - 4640 ×...
  • Page 264 Storage • NEF (RAW): 12 or 14 bit (lossless compressed, compressed, or uncompressed); large, medium, and small available (medium and small images are recorded at a bit depth of 12 bits using lossless compression) File format • (image JPEG: JPEG-Baseline compliant with fine (approx. 1:4), quality) normal (approx.
  • Page 265 Viewfinder Viewfinder Eye-level pentaprism single-lens reflex viewfinder • FX: Approx. 100% horizontal and 100% vertical • 1.2×: Approx. 97% horizontal and 97% vertical • DX: Approx. 97% horizontal and 97% vertical Frame • coverage 5:4: Approx. 97% horizontal and 100% vertical •...
  • Page 266 Lens • Types G, E, and D (some restrictions apply to PC lenses) • Other AF NIKKOR lenses (excluding IX NIKKOR lenses and lenses for the F3AF) • AI-P NIKKOR lenses • Compatible DX lenses (using [DX (24 × 16)] image area) •...
  • Page 267 Release S (single frame), C (continuous low speed), C (continuous high speed), Q (quiet shutter-release), E Release mode (self-timer), M (mirror up) • Approximate : 1–10 fps • frame : 10–14 fps advance rate • Q: 1–5 fps 2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2, Self-timer or 3 s Exposure...
  • Page 268 Exposure • Matrix: 3D color matrix metering III (type G, E, and D lenses); color matrix metering III (other CPU lenses); color matrix metering available with non-CPU lenses if user provides lens data • Center-weighted: Weight of 75% given to 12 mm circle in center of frame;...
  • Page 269 Exposure P (programmed auto with flexible program); S (shutter- Mode priority auto); A (aperture-priority auto); M (manual) Exposure –5 – +5 EV; −3 – +3 EV when filming movies (choose compensation from step sizes of , and 1 EV) Exposure lock Luminosity locked at detected value ISO 100–102400 (choose from step sizes of , and 1 ISO sensitivity...
  • Page 270 Autofocus Detection −4.5 – +20 EV (ISO 100, 20 °C/68 °F) range • Autofocus (AF): Single-servo AF (AF-S); continuous- servo AF (AF-C, viewfinder photography only; predictive focus tracking activated automatically Lens servo according to subject status); full-time AF (AF-F; available only during live view and movie recording) •...
  • Page 271 Accessory ISO 518 hot-shoe with sync and data contacts and shoe safety lock i-TTL flash control, radio-controlled Advanced Wireless Nikon Lighting, optical Advanced Wireless Lighting, modeling Creative illumination, FV lock, Color Information Lighting Communication, auto FP high-speed sync, AF-assist for...
  • Page 272 White balance Auto (3 types), natural light auto, direct sunlight, cloudy, shade, incandescent, fluorescent (7 types), flash, choose color temperature (2500 K–10,000 K), preset White balance manual (up to 6 values can be stored, spot white balance measurement available during live view), all with fine-tuning Bracketing Bracketing...
  • Page 273 Movie • 3840 × 2160 (4K UHD): 30p (progressive), 25p, 24p • 1920 × 1080: 60p, 50p, 30p, 25p, 24p • 1280 × 720: 60p, 50p Frame size • 1920 × 1080 crop: 60p, 50p, 30p, 25p, 24p (pixels) and * Actual frame rates for 60p, 50p, 30p, 25p, and 24p are frame rate 59.94, 50, 29.97, 25, and 23.976 fps respectively...
  • Page 274 Movie Active Can be selected from Extra high, High, Normal, Low, D-Lighting and Off Time-lapse movie recording, electronic vibration Other options reduction, time codes Monitor 8-cm/3.2-in., approx. 2359k-dot (XGA) TFT touch- sensitive LCD with 170 ° viewing angle, approximately Monitor 100% frame coverage, 11-level manual brightness adjustment, and color balance control Playback...
  • Page 275 Interface Type C USB connector (SuperSpeed USB); connection to built-in USB port is recommended HDMI output Type C HDMI connector Stereo mini-pin jack (3.5 mm diameter; plug-in power Audio input supported) Audio output Stereo mini-pin jack (3.5 mm diameter) Ten-pin Built-in (can be used with MC-30A/MC-36A remote remote cords and other optional accessories)
  • Page 276 Wi-Fi/Bluetooth • Standards: - IEEE 802.11b/g/n (Africa, Asia, and Oceania) - IEEE 802.11b/g/n/a/ac (Europe, U.S.A., Canada, Mexico) - IEEE 802.11b/g/n/a (other countries in the Americas) • Operating frequency: - 2412–2462 MHz (channel 11; Africa, Asia, and Oceania) - 2412–2462 MHz (channel 11) and 5180–5825 MHz (U.S.A., Canada, Mexico) Wi-Fi - 2412–2462 MHz (channel 11) and 5180–5805 MHz...
  • Page 277 Wi-Fi/Bluetooth • Communication protocols: Bluetooth Specification Version 4.2 • Operating frequency: - Bluetooth: 2402–2480 MHz Bluetooth - Bluetooth Low Energy: 2402–2480 MHz • Maximum output power (EIRP): - Bluetooth: 1.3 dBm - Bluetooth Low Energy: −0.2 dBm Approximately 10 m (32 ft) Range (line of * Without interference.
  • Page 278 Location data Maximum log recording 6, 12, or 24 hours time Log deletion Supported Power source One EN-EL18c rechargeable Li-ion battery * EN-EL18b/EN-EL18a/EN-EL18 batteries can also be Battery used. Note, however, that fewer pictures can be taken on a single charge with an EN-EL18 than with an EN-EL18c/EN-EL18b/EN-EL18a.
  • Page 279 Nikon reserves the right to change the appearance and specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.
  • Page 280 ❚❚ MH-26a Battery Charger Rated input AC 100 to 240 V, 50/60 Hz Rated output DC 12.6 V/1.2 A Supported Nikon EN-EL18c/EN-EL18b/EN-EL18a/EN-EL18 batteries rechargeable Li-ion batteries Approx. 2 hours and 35 minutes * Time required to charge battery at an ambient Charging time per battery temperature of 25 °C (77 °F) when no charge...
  • Page 281 ❚❚ EN-EL18c Rechargeable Li-ion Battery Type Rechargeable lithium-ion battery Rated capacity 10.8 V/2500 mAh Operating 0 °C–40 °C (+32 °F–104 °F) temperature Dimensions Approx. 56.5 × 27 × 82.5 mm (2.2 × 1.1 × 3.2 in.) (W× H × D) Weight Approx.
  • Page 282: Calibrating Batteries

    Calibrating Batteries The MH-26a battery charger can detect whether batteries require calibration and calibrate them as necessary to ensure the accuracy of the battery level display. Calibration status and progress are shown by lamps on the battery charger: Chamber lamps (green) Charge lamps (green) Calibration lamps (yellow) Calibration buttons...
  • Page 283 Approximate time needed to recalibrate battery Under 2 Over 6 2–4 hours 4–6 hours hours hours I (off) K (on) K (on) K (on) Charge I (off) I (off) K (on) K (on) lamps (green) I (off) I (off) I (off) K (on) Calibration (CAL K (on)
  • Page 284 If the “L” and “R” chamber and calibration lamps flash on and off in sequence when a battery is inserted… …a problem has occurred with the battery or charger during charging. Remove the battery, unplug the charger, and consult a Nikon- authorized service representative. A Charging and Calibrating Two Batteries If batteries are inserted in both chambers, they will be charged in the order inserted.
  • Page 285 D Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data.
  • Page 286 D Supported Standards • DCF Version 2.0: The Design Rule for Camera File System (DCF) is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • Exif version 2.31: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.31, a standard introduced with the goal of improving the interoperability of printers and digital cameras, making it easier to produce high-quality prints.
  • Page 287: Approved Memory Cards

    Approved Memory Cards • The camera can be used with CFexpress (Type B) and XQD memory cards. • Cards with write speeds of 45 MB/s (300×) or better are recommended for movie recording and playback. Slower speeds may result in recording being interrupted. Playback may also be interrupted or jerky when movies are viewed on the camera.
  • Page 288: Memory Card Capacity

    Memory Card Capacity The following table shows the approximate number of pictures that can be stored on a 128 GB card at different image area, image quality, and image size settings. Actual capacity varies with shooting conditions and the type of card. [FX (36 ×...
  • Page 289 Number of Buffer Image Image quality File size exposures capacity size 2, 3 remaining NEF (RAW), Approx. Uncompressed, Large 3500 frames 33.1 MB frames 12-bit NEF (RAW), Approx. 3000 frames Uncompressed, Large 38.0 MB frames 14-bit Approx. Large 8400 frames 10.8 MB frames Approx.
  • Page 290: [Dx (24 × 16)] Selected For Image Area

    [DX (24 × 16)] Selected for Image Area This category also includes images taken with DX lenses when [On] is selected for [Image area] > [Auto DX crop]. Number of Buffer Image Image quality File size exposures capacity size 2, 3 remaining Approx.
  • Page 291 Number of Buffer Image Image quality File size exposures capacity size 2, 3 remaining Approx. 17,400 Large 5.6 MB frames frames Approx. 26,300 JPEG fine Medium 3.7 MB frames frames Approx. 42,400 Small 2.3 MB frames frames Approx. 33,600 Large 2.9 MB frames frames...
  • Page 292 1 Figures are for a Sony CEB-G128 128 GB CFexpress memory card (as of December 2019). 2 Number of pictures that can be saved to memory card or stored in memory buffer varies with scene recorded. 3 Maximum number of exposures that can be stored in memory buffer at ISO 100.
  • Page 293: Battery Endurance

    • Photographs, single-frame release mode: Approximately 3580 (CIPA standard • Photographs, continuous release modes: Approximately 8670 (Nikon standard • Movies: Approximately 105 minutes Actions such as the following can reduce battery endurance: • Using the monitor, for example for live view photography •...
  • Page 294 • Using VR (vibration reduction) with VR lenses • Repeatedly zooming in and out with AF-P lenses To ensure that you get the most from rechargeable Nikon EN-EL18c batteries: • Keep the battery contacts clean. Soiled contacts can reduce battery performance.
  • Page 295 1 EN-EL18b/EN-EL18a/EN-EL18 batteries can also be used. Note, however, that the EN-EL18 can take fewer pictures on a single charge than the EN-EL18c/EN-EL18b/EN-EL18a. 2 Lens cycled from infinity to minimum range and one photograph taken at default settings once every 30 s. Live view not used. Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with an AF-S NIKKOR 24–...
  • Page 296: Location Data (Gps/Glonass)

    Location Data (GPS/GLONASS) Location Data and Track Logs ● • If [On] is selected for [Location data (built-in)] > [Record location data] in the setup menu or log tracking is progress, the camera will continue to acquire log and/or location even while off. •...
  • Page 297: Trademarks And Licenses

    Trademarks and Licenses • CFexpress is a trademark of the CompactFlash Association in the United States and other countries. • NVM Express is a trademark of NVM Express Inc. in the United States and other countries. • XQD is a trademark of Sony Corporation. •...
  • Page 298 Wi-Fi Alliance. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Use of the Made for Apple badge means that an accessory has been...
  • Page 299 D FreeType License (FreeType2) Portions of this software are copyright © 2012 The FreeType Project (https://www.freetype.org). All rights reserved. D MIT License (HarfBuzz) Portions of this software are copyright © 2018 The HarfBuzz Project (https://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved. D Unicode® Character Database License Unicode®...
  • Page 300 THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN...
  • Page 301 D BSD License (NVM Express Driver) The license for the open-source software included in the camera’s NVM Express driver is as follows: ComponentName.c Copyright (c) 2013, Intel Corporation. All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution.
  • Page 302 NvmExpressBlockIo.c Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php.
  • Page 303 NvmExpressDxe.inf Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php.
  • Page 304 NvmExpressHci.h (C) Copyright 2016 Hewlett Packard Enterprise Development LP Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution.
  • Page 305: Notices

    Nikon interference to radio communications. Corporation may void the user’s However, there is no guarantee that authority to operate the equipment.
  • Page 306 Power Cable At voltages over AC 125 V (U.S.A. only): The power cable must be rated for the voltage in use, be at least AWG no. 18 gauge, and have SVG insulation or better with a NEMA 6P-15 plug rated for AC 250 V 15 A. Notice for Customers in Canada CAN ICES-3 B / NMB-3 B Notices for Customers in Europe...
  • Page 307: Bluetooth And Wi-Fi (Wireless Lan)

    FCC WARNING The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Bluetooth and Wi-Fi (Wireless LAN)
  • Page 308 • Consult the dealer or an experienced radio/TV technician for help. Co-location This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200 Bluetooth and Wi-Fi (Wireless LAN)
  • Page 309 Notice for Customers in Europe and in Countries Complying with the Radio Equipment Directive Hereby, Nikon Corporation declares that the radio equipment type D6 is in compliance with Directive 2014/53/EU. The full texts of the EU declarations of conformity are available at the following internet addresses: https://imaging.nikon.com/support/pdf/DoC_N1823.pdf...
  • Page 310 Notice for Customers in Singapore Trade Name: Model: D6 This device complies with radio-frequency regulations. The content of certification labels not affixed to the device is given below. Complies with IMDA Standards DA103423 Notice for Customers in Nigeria Connection and use of this communications...
  • Page 311 Certificates Oman-TRA AGREE PAR L’ANRT MAROC D090024 Numéro d’agrément : MR 21504 ANRT 2019 R/8569/19 Bluetooth and Wi-Fi (Wireless LAN)
  • Page 312: Index

    Index Symbols W ( N ) button ........... d (Help) ............i menu .............. P (Programmed auto) ....... S (Shutter-priority auto) ....Numerics A (Aperture-priority auto) ..... M (Manual) ........... 3D-tracking ..........S (Single frame) ........(Continuous low speed) ..(Continuous high speed) ..
  • Page 313 Eyepiece shutter lever ......Calibration ........... Center-weighted metering ..Face-priority AF ........CFexpress card 38, 257 ....... Fill flash ............Choose color temperature (White Filter effects ..........balance) ............. Flash (White balance) ....... Clarity ............... Flash compensation ......Clean image sensor ......
  • Page 314 L (large) Peripheral connector ................... Landscape (Set Picture Control) Picture Controls ........... Playback 71, 73 ........... LCD illuminator Portrait (Set Picture Control) ........... Live view photography Power connector 198, 207 ..........Live view selector 55, 63 Preset manual (White balance) ......
  • Page 315 Single AF 99, 100 Wireless remote controller ............Single frame Wireless Transmitter Utility ............Single-point AF WT-6 78, 201 ....................Slow sync ............SnapBridge ............. Spot metering .......... XQD card 38, 257 ..........Standard (Set Picture Control) 125 Standby timer ..........
  • Page 316 Index...
  • Page 317: Warranty Terms - Nikon Europe Service Warranty

    Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set as below. Nikon reserves the right (at its sole discretion) to replace or repair the product.
  • Page 318 • any damage resulting from modifications or adjustments which may be made to the product, without the prior written consent of Nikon, in order to comply with local or national technical standards in force in any other country than the ones for which the product was originally designed and/or manufactured.
  • Page 319 Notice: An overview of all authorized Nikon Service Stations can be found online by following this Link (URL = https://www.europe-nikon.com/service/).
  • Page 320 Nikon D6 No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. AMA17090 Printed in Europe SB0B01(11) 6MB46911-01...

Table of Contents