Vacuum Diverter Valve Maintenance - Windsor CV24 Operator Instructions Manual

Vacuum Diverter Valve Maintenance

For maintenance and removal of the vacuum diverter
valve follow the steps below.
3
1. Remove hoses from diverter valve.
2. Remove screw and washer (1) on right side of
hinge bracket.
3. Loosen screw on left side to allow tank to rotate to
the left (do not remove screw). This will allow better
access for valve removal.
NOTE: Remove the post filter for easier access.
1
2
4. Remove the three (3) screws and washers
retaining the diverter valve assembly to the
console.
5. Gently pull valve assembly from console to avoid
damaging valve.
6. Reverse steps to re-install.
86349370 Chariot iVac 24
5
4
31