Vacuum Controls - Windsor CV24 Operator Instructions Manual

Vacuum Controls

1. Function Mode Switch
The first two positions are for transport only. See drive controls section.
A1 - Light vacuuming
This mode is used for light vacuuming. In this mode the machine will propel at fast speed. The 'floating' brush
deck is in the down position. The brushes will agitate, the side broom will bring debris into the path of the deck.
The vacuum will draw the dirt and debris into the debris tray and the vacuum bag.
A2 - Deep vacuuming
This mode is used for deep vacuuming. In this mode the machine will propel at a slow speed. The 'floating'
brush deck is in the down position. The brushes will agitate, the side broom will bring debris into the path of the
deck. The vacuum will draw the dirt and debris into the debris tray and the vacuum bag.
B1 - Accessory mode
This mode is used for using the accessory hose and attachments only. The brush and vacuum deck will both
be up and off. In this mode the machine will not propel.
2. Vacuum Bag Status Light
Light is green when bag is in place and vacuum operating conditions are good.
Light is red if bag is missing or full or vacuum operating conditions are poor.
18 86349370 Chariot iVac 24
2
1