Windsor Cadet CDT7IA Operator Instructions Manual page 13

CORRECT
INCORRECT
PUMP
ON
STEP
STEP
STEP
1/8in
(3mm)
STEP
VACUUM
ON
CADET 86038340 11/02/10
Remove literature from recovery
1
tank. Fill solution tank (see filling
operations, page 3-5).
Plug cord into grounded outlet. Note:
2
Be sure dome is seated on recovery
tank, and float shut-off is installed
correctly.
Adjust brush to proper setting. Note:
3
For good operation the brush must
skim the carpet. If circuit breaker
trips raise brush to prevent damage
to motor or carpet.
Turn on both Vacuum and Pump
4
motor switches ("ON"="I").
OPERATIONS
3-6ENG