ATEN CS1708i User Manual page 137

A description of the Connection Screen is given in the following table:
Server List
Server
Message List
Switch to Remote View Once contact with a CS1708i / CS1716i has been
Change Password
Each time the WinClient.exe file is run, it searches the user's
local LAN segment for CS1708i / CS1716i units, and lists
whichever ones it finds in this box. If you want to connect to
one of these units, double-click it.
This area is used when you want to connect to a CS1708i /
CS1716i at a remote location. You can drop down the IP list
box and select an address from the list. If the address you
want isn't listed, you can key in the IP address you want.
Then, key in the Port number in the Port field. If you don't
know the Port number, contact your Administrator.
When the IP address and Port number for the unit you wish
to connect to have been specified, click Login.
When you have finished with your session and come back
to this dialog box, click Logout.
Lists status messages regarding the connection to the
CS1708i / CS1716i.
established, this button becomes active. Click it to switch and
take over console control of the unit that is attached to the
CS1708i / CS1716i.
The screen output of the unit appears on your monitor. Your
keystrokes and mouse movements are captured and sent to
the CS1708i / CS1716i to be executed on the attached unit.
If the CS1708i / CS1716i is connected to a KVM switch, you
can control the switch and the computers connected to it just
as if you were connected locally.
This button becomes active after a connection to a CS1708i /
CS1716i unit has been established. It allows the user to
change the password used to log in to the CS1708i /
CS1716i.
11. AP Operation
123