Port Operation; The Port Toolbar; Recalling The Gui - ATEN CS1708i User Manual

CS1708i / CS1716i User Manual

Port Operation

Once you select a port on the OSD Main Screen its screen comes up on your
monitor, and your keyboard and mouse input affects the remote system.
Note: The administrator selects which ports are accessible to each user with
the User Management function (see page 98 for details).

The Port Toolbar

The GUI provides a toolbar to help you control the CS1708i / CS1716i from
within the captured port. To bring up the toolbar, tap the OSD Hotkey twice
(Scroll Lock is the default OSD Hotkey). The toolbar appears at the upper left
corner of the screen:
Depending on the settings that were selected under ID Display (see The
Configuration Page, page 95), the Port Number and/or the Port Name
display at the right of the toolbar.
When the toolbar displays, mouse input is confined to the toolbar area.
Keyboard input has no effect on the computer connected to the port. To
carry out operations on the computer connected to the port, close the
toolbar by clicking the X on it, or by pressing [Esc]. You can also recall
the GUI (see below), and select the port again.

Recalling the GUI

To dismiss the toolbar and bring back the GUI (the Main, Configuration, and
Administration pages), do one of the following:
Tap the GUI Hotkey once;
From the toolbar click the icon that brings up the GUI (see page 91).
The Port Toolbar closes, and the main GUI display reappears.
90