NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual page 57

• TO SET RINGER TONE
The procedure below shows how to change the ringer
tone for internal call and external call.
STEP 1: Display the Menu screen, and select Setting.
1
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
1
• Press key.
[Setting]
1
User Setting
2
Download
Data Backup/Restore
3
↓
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
1
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
1
• Press key.
DT730/DT710
, and then press
Menu OK
, and then press
[User Setting]
1
2 Talk
3
Display
4
Change Password
5 Security
6
, 7
STEP 4: Select
Tone (DT710)
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
• Press
[Incoming Call]
1
Ring Volume
2
Offhook Ring
3
Headset Ring
4 Ring Tone
5
Illumination
6
Headset Ring Volume
,
↓
STEP 5: Select
ringer tone for external calls. Select
nal Call when setting the ringer tone for inter-
49
Incoming Call
Peripherals
Usability
↓
Back OK
4
Ring Tone (DT730) /
, and then press
4 2
key (DT730) / key (DT710)
↓
Back OK
1
External Call when setting the
2
Ring
,
2
Inter-