Paging Transfer - NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual

To Answer (Station B)
If Station A remains off hook
STEP 1: Station B dials "Paging" answer code, and
they are immediately connected.
PAGING
1:25 PM
If Station A hung up
STEP 1: Station B dial "Paging" answer code, and Sta-
tion A DT Series rings.
STEP 2: When station A goes off-hook, they are con-
nected.
Note:
Paging function can not be supported with IP
enabled DT700 Series.

PAGING TRANSFER

DT730/710 DT330/310
Example:
Station A receives an important call for Station B who is
not at a desk. Station A can page Station B. When
Station B dials the Paging answer code, Station A can
announce the call and transfer it to Station B.
3
MON 12 JUL 2010
TRANSFER
1:25 PM
Station A Paging
STEP 1: Ask calling party to hold.
STEP 2: Press
Transfer
tone.
STEP 3: Dial "Paging" access code. Receive continu-
ous ringback for one second.
STEP 4: Page Station B.
STEP 5: Remain off-hook or hang up.
To Answer (Station B)
If Station A remained off hook
STEP 1: Station B dials "Paging" answer code, and is
connected with Station A. Station A announc-
es call.
Stations A and B each display
TRANSFER
1:25 PM
160
Calling trunk
number
DDD 3
MON 12 JUL 2010
key. Receive interrupted dial
the other's number
XXXX
MON 12 JUL 2010