NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual page 19

1.
(d) Enter
DT730/DT330 Series has shortcut menu for fre-
quently-used features. Use this key to display the
shortcut menu (see
determine the selected item in the menu.
Also, this key is used as cursor-movement key on
the Menu screen.
Move the highlighted area one line up
Up
the screen.
Move the highlighted area one line
Down
down the screen.
Left Go back to the previous screen.
Go to the screen which corresponds to
Right
the highlighted menu item.
Go to the screen which corresponds to
Enter
the highlighted menu item.
(14)Speaker
Controls the built-in speaker which can be used for
Hands Free dialing/monitoring.
LED on key lights when key is active.
* DT730/DT330 support for full duplex hands-free
mode. DT710/DT310 are half duplex hands-free
mode.
(15)Transfer
Allows the station user to transfer established calls
to another station, without attendant assistance.
SHORTCUT MENU) and
(16)Hold
Press this key to place an internal or external call
on hold.
• THE OTHER KEYS AND PARTS
Redial (only for DTL-2E-1, ITL-2E-1 and DTL-
6DE-1)
(Last Number Call, Speed Calling-Station/Group)
Press key to activate redial feature. Press redial
and scroll back through numbers that have been
dialed.
When the desired number is displayed,
press the or # key to activate dialing.
Note: A-law Countries [Europe, Australia, Russia, Latin
America, Middle near East, other Asian nations]: #
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
Conf (only for DTL-2E-1, ITL-2E-1 and DTL-
6DE-1)
Press key to establish a conversation. LED on key
lights when key is active.
Directory (only for DTL-2E-1, ITL-2E-1 and
DTL-6DE-1)
Press key to activate speed calling - system fea-
ture.
Message (only for DTL-2E-1, ITL-2E-1 and
DTL-6DE-1)
Press key to access the voice mail system.
11