NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual page 100

3
STEP 15:Select Server Address.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
3
• Press key.
[Backup/Restore]
1
Data Backup
2 Data Restore
3 Server Address
4 Protocol
5
FTP Settings
↓
↓
STEP 16:Enter an IP address of the FTP/TFTP server
which stores the backup file. For example, to
set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk
(*)].
[Server Address]
'*'For'.'
.
BK
After entering an IP address, press
OK soft key.
STEP 17:The display goes back to the Backup/Re-
store screen. Select
, and then press
Back OK
1
. .
Back OK
or
2
Data Restore.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
,
• Press
[Backup/Restore]
1 Data Backup
2 Data Restore
3
4
5
FTP Settings
↓
STEP 18:The default file name will be displayed as fol-
lows:
[Data Restore]
Input a folder name.
PersonalData.tgz
BK
Note:
Do not change the extension (.tgz) of the backup
file. If the extension is changed, the file cannot be
restored properly.
Note: When changing the default file name, press BK
soft key once to delete the default file name and
then enter a new file name by using the digits
keys.
Note: For details on character entry method, see
TO INPUT CHARACTERS
Operation.
92
, and then press
2
key.
Server Address
Protocol
↓
Back OK
A
Cancel Exec
in chapter 4 Basic
,
HOW