Attach Linkage Cover; Attach Swing Arms - Nautilus EV716 Assembly Manual

5-1 Use (2) 15mm Phillips Head Screws (Ref #6) to attach the Linkage Cover (#7) to the Base Unit (#4).
Reattach the Lockout Knob (#8).
6-1 Cut wire ties from the top of the swing arm prior to using (2) M12 x 100mm Allen Head Bolts (Ref #19) and
(2) M12 Locking Nuts (ref #21) to attach the Left and Right Swing Arms (#20) to the Side Rails (#9). Tightend
bolts to 36 FT/LBS (500 KG/CM).
BoLT #
BefoRe PRoCeeDINg To THe NexT STeP .
Linkage Cover
19
MuST Be TIgHTeNeD To
ASSEMBLY PROCESS
Step 5: Attach Linkage Cover
Base Unit
Step 6: Attach Swing Arms
Side Rail
Swing Arm
36 500
fT/LBS ( kg/CM)
Nautilus® Pro Series Elliptical Assembly Manual
1