Axis 5600 User Manual page 84

AXIS 5600 User's Manual
Integration into the
Host Printer Spooler
To integrate the AXIS 5600 into the host printer spooler, you can use
the auto installation script axinstall, resident in the AXIS 5600. Follow
the instructions below to install axinstall onto your host using FTP:
1. Login to the AXIS 5600 using the command:
ftp <host name>
2. Enter as the user id and
root
3. Download the script using the command:
get axinstall
Log out using the command
FTP version.
> ftp npserver
connected to npserver.
220 AXIS 5600 FTP Print Server v6.00 Jun 17 1999
ready.
Name (npsserver:thomas): root
331 User name ok, need password
Password: pass
230 User logged in
ftp> get axinstall
200 PORT command successful.
150 Opening data connection for axinstall
(192,36,253,4,13,223), (mode ascii).
226 Transfer complete.
local: axinstall remote: axinstall
61187 bytes received in 14 seconds (4.2 kbytes/s)
ftp> bye
221 Goodbye.
>
Typical FTP session for collecting the axinstall script
Section 8: Setting Up - UNIX
or
ftp <IP address>
as the password.
pass
or
quit, bye exit
(not visible)
depending on your
83