Installing The Axis 5600 In Ndps Environments - Axis 5600 User Manual

Section 4: Setting Up - NetWare
36

Installing the AXIS 5600 in NDPS environments

Public Access
Having assigned an IP address to the AXIS 5600 as described in
Assigning an IP address, on page 25, you are now ready to install the
AXIS 5600 for NDPS printing. You can select to install the connected
printers as public or controlled access printers. Follow the instructions
below to install the AXIS 5600 using NDPS:
The HP-JETADMIN parameter of the Axis 5600 must be set to
Notes:
YES in order for the communication between the AXIS 5600 and
the NDPS gateway to be enabled.
If you do not have an NDPS Manager object available, start out
with creating one in the NetWare Administrator.
To create a public access printer using the NDPS Manager object in
your NetWare administrator, do the following:
1. Double-click on the NDPS Manager object you will be using to
control the Printer Agents.
2. At the Identification page for the NDPS Manager, click the
printer Agent List button. The Printer Agent List dialog will
appear.
3. Click New. The Create Printer Agent dialog will appear.
4. Type a name of your choice in the NDPS Printer Agent field.
5. Choose the Axis Gateway configuration in the Gateway Type
window. Select TCP/IP or IPX as transport protocol. (See Note
below).
6. Click OK.
7. Once you have completed the required tasks, you are ready to
print in your NDPS environment.
The Public Access print servers are immediately available for
Notes:
everyone on the network.
AXIS 5600 User's Manual