Axis 5600 User Manual page 154

153
AXIS 5600 User's Manual Appendix C: Technical Specifications
SNMP-MIB II compliant (over UDP/IP and IPX), host resource MIB
Network Management
compliant (over UDP/IP and IPX), private enterprise MIB included. LAN
Network Manager for OS/2. Print server status in NWAdmin/PCONSOLE.
32 bit 100 MHz RISC Controller, 1 Mbyte Flash memory. 2 Mbytes RAM.
Hardware
Logical Connection NWay support to provide auto-detection of the network speed. Running
simultaneously any combination of the supported protocols. Use of
IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types simultaneously.
RJ-45 connector (Category 5 Unshielded Twisted Pair) for 10baseT Ethernet
Attachments
and 100baseTX Fast Ethernet.
Security
Root password. User access list and printer access.
UNIX:
Encrypted passwords.
NetWare:
The logical printer ports can be programmed to perform auto ASCII to
Logical Printers
PostScript conversion, string before and after job, string substitution,
alternative output and character set conversion.
Two IEEE 1284 compliant high-speed parallel ports with 25-pin DSUB
Parallel Printer
connectors. s. Sustained throughput over 1 Mbyte/s using NetWare. Bi-
directional support for Apple, Reverse Telnet, PROS. ECP support.
One serial port, RS 232, 9-pin DSUB connector. XON/XOFF or RTS/CTS.
Serial Printer
Data rates up to 115,200 baud.
Front Panel 2 LED indicators: Power and Network.
Test button for information printouts.