How To Use It - Axis 5600 User Manual

AXIS 5600 User's Manual

How to use it

Installation and
Integration
Notes:
Configuration and
Management
The installation of the AXIS 5600 and its integration into the network
is performed using the appropriate Axis client software, provided with
your print server:
• AXIS NetPilot™ (NetWare - IPX)
• AXIS Print System (Windows 95/98, NT4.0 and 2000)
• AXIS Print Monitor (Windows NT 3.5x)
• AXIS Print Utility for Windows (Windows 3.1 and WfW)
• AXIS Print Utility for OS/2
• axinstall (UNIX)
The AXIS 5600 can be installed in the Macintosh environment
without any Axis client software.
The AXIS 5600 can be installed in NetWare - Pure IP
environments with NetWare Administrator.
As the AXIS 5600 comprises a built-in Web server, it can be
configured and managed directly from its internal Web pages, using
HTTP over TCP/IP. Access to the AXIS 5600 via any javascript-
enabled Web browser, offers you a platform-independent
management tool that is suitable for all supported network
environments.
In TCP/IP networks you can also use AXIS ThinWizard, which
provides you with remote management capabilities for your AXIS
ThinServer devices.
If your network does not support TCP/IP, you can use AXIS NetPilot
to configure and manage the AXIS 5600. AXIS NetPilot supports
communication via IPX/SPX and NetBIOS/NetBEUI.
Section 1: Introduction
9