Section 3: Basic Installation
26
Methods for setting
the IP Address
You can set the IP address using one of the following methods,
depending on your network operating environment:
Method
AXIS IP Installer
DHCP
ARP
RARP
BOOTP
AXIS NetPilot
The ARP and RARP methods operate on single network segments
Notes:
only, that is they cannot be used over routers.
Refer to Setting Parameters, on page 80 for information about
setting the IP address in the Macintosh environment.
Network environments
Windows 95/98/NT/2000
Windows NT/2000, UNIX,
NetWare 5, OS/2
Windows 95/98/NT/2000, OS/2
UNIX
UNIX
UNIX, NetWare 5, OS/2
Windows 95/98/NT/2000,
NetWare 5
AXIS 5600 User's Manual
See ...
page 28
page 29
page 30
page 31
page 32
page 33
Basic Setup with
AXIS NetPilot, on
page 21