Table of Contents
Advertisement
:
"II" or "
"
•
Pressing the "
II
" button for two seconds can be used to activate an extra output,
known as the "2nd channel", for an optional function such as trunk release.
•
Pressing and releasing this button twice arms or disarms the system without the
confirmation chirps.
•
Pressing this button immediately after arming will leave the alarm armed, but
with the shock sensor feature bypassed.
"III" or " "
•
Pressing and releasing the "
III
3rd channel output. This will also activate a factory remote start if your vehicle
is equipped and the AL-1510-EDP is configured to do so.
•
The "
III
" button can be reprogrammed for additonal operations. See programmable
feature #21.
"P" on the controller only.
•
The controller has a fifth button, "
when pressed. This is also the "
controller operations, which is explained on pages 19 and 20.
•
Multi-car selection: The 2-way controller can operate up to 2 separate systems.
Pressing the "P" button and the "lock" button at the same time for 1 second will
select CAR 1and pressing the "P" button and the "unlock" button at the same
time for 1 second will select CAR 2 as indicated on the controller's display.
How the 2-Way Echo controller reacts is included in the following
general system operation descriptions, and then a more detailed
description the Echo's icons and instructions for its programming
are detailed on pages 17-20.
- IMPORTANT -
The Excalibur AL-1510-EDP is one of the most versatile vehicle
security systems made. It has many programmable features which
can offer more functions and operations beyond which are de-
scribed in the basic system instructions.
To a large degree, these extra features and operations are config-
ured at the installation of the system. Please read the sections of
this manual which explain programmable features, and please
consult your installer for specifics on how your system is config-
ured, and for installation options which may have used, or can be
added to system after installation.
EXAMPLE- the Excalibur can sound the vehicle's horn in place of
or in addition to the electronic siren which is included with it. But
the operations are described with the siren only.
" button 2 times in 5 seconds will activate the
P
", which will illuminate the LCD screen
P
rogramming" button; it is used to customize
Page - 6
there is a brief period of time in which a system activation, or alarm, cannot occur.
This Arming Delay allows the system to completely process its sensory parameters,
which can include allowing the vehicle to stabilize. In some cases more time is
needed than the factory-set 3 seconds, and this feature offers three longer delay
options.
Feature #15 Steady Siren or Pulsed Horn
Factory Default Setting
Steady Siren
press "arm/lock" button to program
(
Options:
press "disarm/unlock" button to program
Pulsed Horn Low
(
Pulsed Horn Medium
(
press "II" button to program
press "III" button to program
Pulsed Horn High
(
It is important to understand that the Excalibur has a primary audible output, for
the electronic siren; and that it also has a programmable output used to sound the
vehicle's existing horn. This feature changes only the primary audible output, so
that it can be utilized to sound the existing horn by itself. This is for cases when
the programmable output is desired for other features, such as OEM disarm, or as
an additional auxiliary output.
The Steady Siren setting is exactly that- a steady output which the electronic
siren requires. When programming this feature for using the output for the vehicle's
horn, the optional setting produce pulsed output on the system's siren wire, in
three different pulse timings, which allow a degree of customization of the horn's
sound during the alarm activation.
Feature #16 Alarm Functions Bypass
Factory Default Setting
Off
Option:
On
This feature converts the system into a strictly Remote Keyless Entry System by
eliminating all antitheft alarm-oriented operations and features. When this feature
is programmed on, the Excalibur has remote keyless entry operation only.
Feature #17 Ignition Activated Anti-Carjacking Protection
Factory Default Setting
Off
Option:
On
This form of Anti-Carjacking is initiated by the ignition key being turned on. The
Anti-Carjacking protection, and the three ways to initiate it are described on page
21.
)
)
)
press "disarm/unlock" button to program
(
(
press "arm/lock" button to program
(
press "disarm/unlock" button to program
press "arm/lock" button to program
(
Page - 31
)
)
)
)
)
Hide quick links:
Advertisement
Table of Contents
