7.
Push the coloured locking lever away from you (towards
the back of the printer) to lock the cartridge home and
release the toner supply.
8.
Repeat the installation process for the remaining three toner
cartridges.
Installing Fuser Oil Roller
The fuser oil roller assembly contains two rollers which bear
against the top fuser roller and clean any excess toner which
might otherwise be carried over onto successive pages.
It locates directly above the main fuser assembly, and is a user
replaceable part.
Setup Guide
1.
Remove the oil roller assembly from its wrapping.
2.
Remove the coloured spacer (1) from the new oil roller.
1
3. Hold the assembly horizontally above the fuser, with the
yellow warning label (2) at the top and towards you.
2
4. Lower the left end of the oil roller assembly into the printer,
and locate the extreme left end under the locating tab (3)
on the end of the fuser.
3
11