Demonstration Mode - Furuno DS-80 Operator's Manual

1.7.7 System menu 2
The System Menu 2 contains the diagnostic
test and selection of dimmer control and
display language.
1. Press the [MENU] key to open the
menu.
2. Select SYSTEM MENU 2 and press the
[ENT] key.
SYSTEM MENU2
TEST
DIMMER
/LANG. ENGLISH
TEST: Checks the equipment for proper
operation. For further details see Chapter 3.
DIMMER: See paragraph 1.3.2.
LANG.: Selects the language to use in
menus, English or Japanese.
1.8

Demonstration Mode

The demonstration mode outputs the
Doppler speed signal to external equipment.
This checks if the signal is being correctly
output. )
1. Press the [MENU] key to open the
menu.
2. Select DEMO and press the [ENT] key.
DEMO
SPEED
DATA DISPLAY
3. Select SPEED and press the [ENT] key.
INTERNAL
ENT: SET
+ 1 0 . 0 k t
OFF
ENT: SET
4. Select the digit to change with
5. Use or
is
-10.0 to +40.0 kt, and the default setting
is +10.0 kt.)
6. Press the [ENT] key.
7. Press the [ENT] key to open the DATA
DISPLAY menu.
DEMO
SPEED
DATA DISPLAY
8. Press to select ON and press the
[ENT] key.
9. Press the [MENU] key twice to close the
menu.
The indication "DEMO" appears at the top
right-hand corner when the demo mode is
on. To turn off the demonstration display,
show the DEMO menu and set SPD to OFF.
SPEED
DISTANCE
11
to set. (The setting range
+ 1 0 . 0 k t
OFF
ON
OFF
ENT: SET
DEMO
Demonstration
10.0
mode "ON"
kt
or .