Short-Cut Menu, Preset Menu - Furuno CH-250 Operator's Manual

5.3

Short-cut Menu, Preset Menu

These menus program the CUSTOM MODE keys [1], [2] and [3], and one of the menus appears
according to the setting of CUSTOM KEY on the SYSTEM SETTING 1 menu.
Short-cut key: One-touch activation of corresponding dialog box. This is the default setting.
Preset key: One-touch setup of mode, sector, train, range, tilt and speed controls. Below are
the default settings for PRESET.
CUSTOM MODE
key
Key 1
Key 2
Key 3
* - Default range for 60 kHz transducer. Default range changes with transducer.
5.3.1 Selecting short-cut or preset
1. Press the [MENU] key to open the menu.
2. Press to select MENU, and then press
MENU
GO TO SYS MENU
: SELECT
3. Press to select GO TO SYS MENU.
4. Press to select YES.
5-4
Display Mode
Expanded Horizontal
Horizontal
Vertical Fan
COM1 COM2
YES
: CHANGE
Figure 5-2 Display for opening system menu
Sector Train
240 0
360 0
180 90
to select SYS.
HORZ VERT ES PRESET
NO
MENU: END
Range (m)* Tilt
250
30
250 30
120 90
SYS
Speed
Fast
Fast
Fast