Menu Operation; Com1 Menu - Furuno CH-250 Operator's Manual

5. MENU OPERATION

This chapter provides menu operating information on menus not previously discussed: COM1,
COM2, PRESET (or SHORT-CUT, depending on the setting of CUSTOM KEY on the SYSTEM
SETTING 1 menu) and SYS (System) menu.
5.1

COM1 Menu

1. Press the [MENU] key to open the menu.
2. Press to select MENU, and then press
MENU
TX POWER
PULSELENGTH
TX RATE
INT REJECT
AGC
AUDIO LEVEL
: SELECT
3. Press or to select item;
4. Press or to select option desired.
5. Press or to return to the COM1 menu, or press the [MENU] key to register your
selection and close the menu.
to select COM1.
COM1 COM2 HORZ VERT
MAX
LONG
10
OFF
OFF
0
: CHANGE MENU: END
Figure 5-1 COM1 menu
or to open associated dialog box.
ES PRESET SYS
5-1