System Configuration - Furuno CH-250 Operator's Manual

SYSTEM CONFIGURATION

INTERFACE UNIT IF-8000
Display
Unit
VGA Ext.
Monitor
TRANSCEIVER UNIT
CH-253
HULL UNIT
SPEAKER
Speaker
Note 1: MU-100C is the standard supply
monitor unit. An external monitor
may be connected via the
interface unit (option). The drawing
above shows the system configuration
with the MU-100C. The monitor unit and
control unit can be installed separately
(optional mounting kit required).
Note 2: For blackbox type, MU-100C is
not supplied. Connect external
monitor and control unit to the
interface unit.
How to remove the hard cover (blackbox type only)
Place your thumbs at the locations shown with
circles in the illustration at right, and then lift the
cover while pressing it with your thumbs.
viii
Note 2
Navigator
Control Unit
Remote
Controller
CH-256
MOTION SENSOR
12-32 VDC
DA T A/VIDEO OUT
Motion Sensor
MS-100
MONITOR UNIT MU-100C
CONTROL UNIT CH-252
HULL UNIT
12-32 VDC
CH-254/254S
CH-255/255S
Note 1
12/24-32 VDC