Menu Operation - Furuno FE-700 Operator's Manual

2 MENU OPERATION

2.1 Menu O e ie
The menu has several functions for advanced
operation.
1. Select EN with the
CLUTTER
AUTO
INTERFERENCE REJECT
OFF IR1
PICTURE ADVANCE
SLOW FAST
TREND INDICATOR
OFF ON
INTERVAL
5s 1min
: To select item
- + : To set option
ECHO XDR*
FORE
CAUTION!
SYSTEM MENU IS ONLY
FOR INSTALLATION. DO
NOT CHANGE SETTINGS.
GO TO SYSTEM MENU?
NO
: To select item
- + : To set option
(2/2, single mode)
*For the dual mode. "HISTORY XDR" appears.
2. Press the [ ] or [ ] key to select menu
item. As you operate the [ ] or [ ] key, the
selected item and its current setting appear
in reverse video.
. Press the [-] or [+] key to select option
desired.
. Set the ODE Selector in another position
to close the menu.
ODE Selector.
(0-16)
IR2 IR3
2 min
1/2
(1/2)
AFT
YES
2/2
2.2 Su e
Noi e
Light-blue dots may appear overall screen. This
is mainly due to dirty water or noise. This noise
can be suppressed by ad usting L TTER (in
reality, Threshold of the amplifier).
When the automatic mode is on, the
suppression setting is automatically ad usted.
For manual override, do the following:
1. Select EN with the
2. Select L TTER by pressing the [ ] key.
. Press the [-] or [+] key to select clutter
re ection level desired. The higher the
number the higher the degree of
suppression. Note that weak echoes may
not be displayed when the clutter circuit is
on.
2.3 Su e
Interference from other acoustic e uipment
operating nearby or other electronic e uipment
on your boat may show itself on the display.
To suppress interference, do the following:
1. Select EN with the
2. Select INTERFEREN E RE E T by
pressing the [ ] or [ ] key.
. Press the [-] or [+] key to select degree of
suppression desired OFF, IR1, IR2 or IR .
The higher the number the greater the
degree of suppression.
Note that oversuppression will weaken the
sensitivity.
ing Lo Le el
ODE Selector.
ing Inte e en e
ODE Selector.