Indicators; Installation And Removal Instructions; Installing The Asa 5500 Aip Ssm - Cisco IPS 7.1 Installation Manual

Chapter 8 Installing and Removing the ASA 5500 AIP SSM

Indicators

Figure 8-3
Figure 8-3
Table 8-3
Table 8-3
1
2
3
4

Installation and Removal Instructions

This section describes how to install and remove the ASA 5500 AIP SSM, and contains the following
topics:
•
•
•

Installing the ASA 5500 AIP SSM

To install the ASA 5500 AIP SSM for the first time, follow these steps:
Power off the adaptive security appliance.
Step 1
Locate the grounding strap from the accessory kit and fasten it to your wrist so that it contacts your bare
Step 2
skin. Attach the other end to the chassis.
OL-24002-01
shows the ASA 5500 AIP SSM indicators.
ASA 5500 AIP SSM Indicators
describes the ASA 5500 AIP SSM indicators.
ASA 5500 AIP SSM Indicators
LED Color State
PWR Green On
STATUS Green Flashing
Solid
LINK/ACT Green Solid
Flashing
SPEED Green 100 MB
1000 MB
Amber
(GigabitEthernet)
Installing the ASA 5500 AIP SSM, page 8-5
Verifying the Status of the ASA 5500 AIP SSM, page 8-7
Removing the ASA 5500 AIP SSM, page 8-7
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
3 4
1 2
Description
The system has power.
The system is booting.
The system has passed power-up diagnostics.
There is Ethernet link.
There is Ethernet activity.
There is network activity.
There is network activity.
Indicators
8-5