Table of Contents
Advertisement
Appendix E
Troubleshooting
Version Information
The show version command is useful for obtaining sensor information. This section describes the show
version command, and contains the following topics:
•
•
Understanding the show version Command
The show version command shows the basic sensor information and can indicate where a failure is
occurring. It gives the following information:
•
•
•
•
To get the same information from IDM, choose Monitoring > Sensor Monitoring > Support
Note
Information > Diagnostics Report. To get the same information from IME, choose Configuration >
sensor_name > Sensor Monitoring > Support Information > Diagnostics Report.
Displaying Version Information
Use the show version command to display version information for all installed operating system
packages, signature packages, and IPS processes running on the system. To view the configuration for
the entire system, use the more current-config command.
The CLI output is an example of what your configuration may look like. It will not match exactly due to
Note
the optional setup choices, sensor model, and IPS 7.1 version you have installed.
To display the version and configuration, follow these steps:
Log in to the CLI.
Step 1
View version information.
Step 2
sensor# show version
Application Partition:
Cisco Intrusion Prevention System, Version 7.1(3)E4
Host:
Signature Definition:
OS Version:
Platform:
Serial Number:
No license present
Sensor up-time is 13 days.
Using 4395M out of 5839M bytes of available memory (75% usage)
OL-24002-01
Understanding the show version Command, page E-89
Displaying Version Information, page E-89
Which applications are running
Versions of the applications
Disk and memory usage
Upgrade history of the applications
Realm Keys
key1.0
Signature Update
S605.0
2.6.29.1
ASA5585-SSP-IPS10
123456789AB
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
2011-10-25
Gathering Information
E-89
Advertisement
Table of Contents
Troubleshooting
