Table of Contents
Advertisement
Chapter 7
Installing the IPS 4510 and IPS 4520
Memory Configurations
The IPS 4510 and IPS 4520 have up to 6 DIMM modules per CPU. DIMM population is
platform-dependent.
Table 7-5
Model
IPS 4510
IPS 4520
Power Supply Module Requirements
Table 7-6
Table 7-6
Output Voltage
Maximum
Nominal
Minimum
Output Current @ 200 VAC
Maximum
Minimum
Output Current @ 100 VAC
Maximum
Minimum
Note
The IPS 4520 requires two power supply modules.
Supported SFP/SFP+ Modules
The SFP/SFP+ module is a hot-swappable input/output device that plugs into the SFP/SFP+ ports and
provides Gigabit Ethernet connectivity. The SFP and SFP+ modules are optional and not included with
the IPS 4510 and IPS 4520. You can purchase them separately. For 1 Gb, you need SFP. For 10Gb, you
need SFP+. The interfaces are called TenGigabitEthernet 0/x whether they are 10 Gb-enabled or not.
OL-24002-01
Table 7-5
shows the memory configurations.
Memory Configurations
lists the power supply module requirements.
Power Supply Module Requirements
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
Memory
24-GB DRAM
48-GB DRAM
50 V
12 V
52.0 V
12.2. V
50.0 V
12.0 V
48.0 V
11.8 V
17.3 A
27.0 A
0
0
17.3 A
27.0 A
0
0
Memory Configurations
3.3 V_STBY
3.45 V
3.35 V
3.25 V
1.5 A
0
1.5 A
0
7-11
Advertisement
Table of Contents
Troubleshooting
