Resetting Trip Distance - Furuno 1823C Operator's Manual

3. PLOTTER OPERATION
3.12

Resetting Trip Distance

Trip distance is shown on the navigation data display. You can reset the trip
distance to zero as follows:
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION and GENERAL SETUP soft keys in
that order to show the GENERAL SETUP menu.
3. Use the trackball to select RESET TRIP LOG, then press the EDIT soft key.
4. Use the trackball to select YES, then press the ENTER soft key.
5. Press the [MENU] key to close the menu.
3-60
General setup menu, page 1
GENERAL
SETUP1
EDIT
NEXT
PAGE
RETURN