Displaying Target Number (Arp, Ttm) - Furuno 1823C Operator's Manual

6. Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5
miles in range and ±45º on either side of the heading line in bearing appears.
Note: Targets being tracked in automatic acquisition are continuously
2.26.3

Displaying target number (ARP, TTM)

Target number can be shown for ARP and TTM targets as below.
1. Press the [MENU] key.
2. Press the ARP SETUP soft key.
3. Select TARGET ID NUMBER.
4. Press the EDIT soft key.
5. Select ON or OFF as appropriate.
6. Press the ENTER soft key.
7. Press the [MENU] key to close the menu.
tracked when switching to manual acquisition.
45 port
Automatic acquisition area
3nm
12/
LP
H-UP
ARP
Target
Number
45 starboard
319. 9
01
ARP target number
2. RADAR OPERATION
T
TARGET
TRAIL
TLL
OUTPUT
ACQ
TARGET
INFO
RETURN
359.9 ˚R
+
11.70
nm
2-37