1. OPERATIONAL OVERVIEW
2. Press function key desired.
Note: Function keys can be individually programmed for the plotter, radar and
sounder displays. For further details see the following:
Radar: paragraph 5.2.3
Plotter: paragraph 5.3.2
Sounder: paragraph 5.9.4
1.10
Simulation Display
The simulation display, for use by service technicians for demonstration
purposes, provides simulated operation to help acquaint you with the many
features your unit has to offer. It allows you to view and control a simulated
plotter, radar and sounder picture, without position-fixing equipment, network
radar or a network sounder. Most controls are operative, thus you may practice
setting destination, enter waypoints, measure range and bearing to a target, etc.
The simulation icon (
To start the simulation display;
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION, SYSTEM SETUP and SIMULATION
SETUP soft keys in that order.
3. Follow appropriate procedure on the next several pages.
1-18
S I
) appears when any simulation mode is active.
M
Simulation setup menu
SIM
SETUP
EDIT
RETURN