Stopping, Restating Plotting Of Own Ship Track - Furuno 1823C Operator's Manual

Target track
Target track, NMEA format TTM (Tracked Target Message) data sentence, may
be turned on or off as desired. The default setting is ON.
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
2. Use the trackball to select TARGET TRACK DISPLAY.
3. Press the EDIT soft key to show the target track display window.
4. Use the trackball to select to ON (default setting) or OFF as appropriate.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.
3.6.2 Stopping, restarting plotting of own ship track
When your boat is at anchor or returning to port you probably won't need to
record its track. You can stop recording the track, to conserve the track memory,
as follows:
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
TRACKING
2. Press the TRACK RESUME soft key. The soft key now shows "TRACK
HALT" and the indication "TRACKING" in the SHIP'S TRACK STATUS
window changes to "NOT TRACKING." In addition, the icon "H" is displayed
at the top of the plotter display and own ship marker becomes a hollow circle.
To restart plotting the track, press the TRACK HALT soft key
3. Press the [MENU] key to close the menu.
TRACK
CONTROL
EDIT
TRACK
RESUME
TRACK
RESUME
ERASE
TRACK
T & M
HALT
MARK
SETUP
RETURN
Track control menu
3. PLOTTER OPERATION
NOT TRACKING
TRACK
CONTROL
EDIT
TRACK
HALT
ERASE
T & M
MARK
SETUP
RETURN
3-19